On Thu, 25 Aug 2005, wanderer@xxxxxxxxxx wrote: > Hi, Hi Vesa and the list, > I've tried to get my Pinnacle card to work. This list has other messages > concerning this same driver and I've followed those instructions and tried > kernels 2.6.11 and 2.6.12 with video4linux patches. With 2.6.11 and v4l patch > saa7134-dvb driver isn't loaded, but with 12 it is, so I used that. Up to now I have used kernels 2.6.10 and 2.6.11 on two different machines running Debian Linux and patches from video4linux. Both cards are working. > Now the board is found correctly, but frontend won't work because mt352 gives > trouble. Is it so that tuner module mt20xx don't support mt2050 tuner yet ? > > From /var/log/messages: > /... > kernel: saa7130/34: v4l2 driver version 0.2.14 loaded > kernel: saa7130/34: snapshot date 2005-08-01 > kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10 > kernel: saa7133[0]: found at 0000:00:08.0, rev: 208, irq: 10, latency: 32, > mmio: 0xeb101000 > kernel: saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 300i DVB-T + > PAL [card=50,insmod option] > kernel: saa7133[0]: board init: gpio is 600e000 > kernel: saa7133[0]: dsp access wait timeout [bit=WRR] > kernel: saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 > b2 92 > kernel: saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c 0f 7e > ff ff > kernel: saa7133[0]: i2c eeprom 20: 01 2c 01 03 03 01 04 31 98 ff 00 a8 ff 21 > 00 c2 > kernel: saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 77 03 17 > fd b6 > kernel: : chip found @ 0x96 (saa7133[0]) > kernel: tuner 2-004b: microtune: companycode=8000 part=21 rev=06 > kernel: tuner 2-004b: microtune unknown found, not (yet?) supported, sorry > :-/ kernel: saa7133[0]: registered device video0 [v4l2] > kernel: saa7133[0]: registered device vbi0 > .../ Here is from my dmesg: Linux video capture interface: v1.00 saa7130/34: v4l2 driver version 0.2.13 loaded saa7130/34: snapshot date 2005-05-25 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 saa7134[0]: found at 0000:00:09.0, rev: 1, irq: 17, latency: 32, mmio: 0xcfff7c00 saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected] saa7134[0]: board init: gpio is c806000 saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 1-0060: chip found @ 0xc0 (saa7134[0]) tuner 1-0060: microtune: companycode=3cbf part=42 rev=2f tuner 1-0060: microtune MT2050 found, OK tda9885/6/7: chip found @ 0x86 saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: pinnacle 300i dvb setup DVB: registering new adapter (saa7134[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... > And dmesg gives line: > /.. > tuner 2-004b: Tuner has no way to set tv freq > ../ > > Technical data tells that > video decoder is Philips SAA7134 (and board identifies as 7133, well, > wouldn't count very much on this info). > tv tuner is Microtune MT2050 frequency range 45.75 to 863.25 MHz > Analog demodulator TDA 9885 > DVB-T demodulator Zarlink MT352 16,64 QAM, QPSK 6,7,8 MHz bandwith UHF VHF To the best of my knowledge the above data is correct. I am just compiling kernel 2.6.12.5 on the other machine for testing. > Am I in trouble or have I simply forgotten something ? Can't say just now, maybe after testing with 2.6.12.5 ? > Vesa Regards, Rainer -- Rainer Schubert - Linux TV User Amateur Radio Call DL6HBO
