Hi, just wanted to enter the dvb arena and bought a hauppauge nexus-ca card. loading the driver seems to work as the debug output shows: Aug 14 19:26:05 linux kernel: saa7146: register extension 'dvb'. Aug 14 19:26:05 linux kernel: ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 17 (level, low) -> IRQ 185 Aug 14 19:26:05 linux kernel: saa7146: found saa7146 @ mem f8e96c00 (revision 1, ir q 185) (0x13c2,0x000a). Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_attach(): dev: f08a9d80 Aug 14 19:26:05 linux udevd[2471]: move seq 1424 with timeout 10 to exec queue Aug 14 19:26:05 linux kernel: DVB: registering new adapter (Technotrend/Hauppauge W inTV Nexus-CA rev1.X). Aug 14 19:26:05 linux kernel: adapter has MAC addr = 00:d0:5c:25:a1:42 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): debi test OK Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load boot code Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load dram code Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 0 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 1 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 2 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 [lots of these lines] Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 75 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load dpram code Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_firmversion(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_fw_request(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq 0x0000 0 Aug 14 19:26:05 linux kernel: dvb-ttpci: gpioirq unknown type=0 len=0 Aug 14 19:26:05 linux kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b025001 8, vid 71010068, app 8000261f Aug 14 19:26:05 linux kernel: dvb-ttpci: firmware @ card 0 supports CI link layer i nterface Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_set_volume(): av7110:de170000, Aug 14 19:26:05 linux kernel: dvb-ttpci: arm_thread(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: adac type set to 0 @ card 0 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_set_volume(): av7110:de170000, Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_setup_irc_config(): de170000 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_register(): de170000 Aug 14 19:26:05 linux kernel: saa7146_vv: saa7146 (0): registered device video0 [v4 l2] Aug 14 19:26:05 linux kernel: DVB: registering frontend 0 (ST STV0297 DVB-C)... Aug 14 19:26:05 linux kernel: input.c: calling hotplug without a hotplug agent defi ned Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_setup_irc_config(): 00000000 Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_register_irc_handler(): registering f923ddb0 Aug 14 19:26:05 linux kernel: dvb-ttpci: found av7110-0. Aug 14 19:26:10 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq 0x000d 0 Aug 14 19:26:10 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq: DATA_MPEG_VIDEO_EVEN T: w/h/ar = 0/0/0 Aug 14 19:26:12 linux hald[6325]: Timed out waiting for hotplug event 1408. Rebasin g to 1410 but when I try to scan for the channels i get the following messages: Aug 14 19:29:20 linux kernel: nexusca: pll transfer failed! Aug 14 19:29:20 linux kernel: stv0297_writereg: writereg error (reg == 0x82, val == 0x00, ret == -5) Aug 14 19:29:20 linux kernel: stv0297_readreg: readreg error (reg == 0x25, ret == - 5) Aug 14 19:29:20 linux kernel: stv0297_writereg: writereg error (reg == 0x25, val == 0xff, ret == -5) Aug 14 19:29:21 linux kernel: stv0297_writereg: writereg error (reg == 0x21, val == 0x40, ret == -5) Aug 14 19:29:21 linux kernel: stv0297_writereg: writereg error (reg == 0x20, val == 0x5d, ret == -5) Aug 14 19:29:22 linux kernel: nexusca: pll transfer failed! Aug 14 19:29:22 linux kernel: stv0297_writereg: writereg error (reg == 0x82, val == 0x00, ret == -5) Aug 14 19:29:22 linux kernel: stv0297_readreg: readreg error (reg == 0x25, ret == - 5) Aug 14 19:29:22 linux kernel: stv0297_writereg: writereg error (reg == 0x25, val == 0xff, ret == -5) Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x21, val == 0x40, ret == -5) Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x20, val == 0x5d, ret == -5) Aug 14 19:29:23 linux kernel: stv0297_readreg: readreg error (reg == 0x43, ret == - 5) Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x43, val == 0xef, ret == -5) ... did I missed something? I tested with vanilla kernel 2.6.12.4 on a suse 9.3 box. any hint what I can do? kind regards sebastian _________________________________________________________________________ Mit der Gruppen-SMS von WEB.DE FreeMail k?nnen Sie eine SMS an alle Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179
