[linux-dvb] [PATCH] Clean-up dvb-bt8xx.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This patch makes indentation consistent in dvb-bt8xx.c and removes unnecessary 
braces.

Signed-off-by: David Johnson <dj@xxxxxxxxxxxxxxx>


--- linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c.orig 2005-08-03 
18:02:32.869453500 +0100
+++ linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c 2005-08-03 17:58:28.018151250 
+0100
@@ -32,9 +32,7 @@
 #include "dvbdev.h"
 #include "dvb_demux.h"
 #include "dvb_frontend.h"
-
 #include "dvb-bt8xx.h"
-
 #include "bt878.h"
 
 static int debug;
@@ -43,9 +41,9 @@ module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
 #define dprintk( args... ) \
- do { \
+ do \
   if (debug) printk(KERN_DEBUG args); \
- } while (0)
+ while (0)
 
 static void dvb_bt8xx_task(unsigned long data)
 {
@@ -119,14 +117,12 @@ static struct bt878 __init *dvb_bt8xx_87
  unsigned int card_nr;
 
  /* Hmm, n squared. Hope n is small */
- for (card_nr = 0; card_nr < bt878_num; card_nr++) {
+ for (card_nr = 0; card_nr < bt878_num; card_nr++)
   if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
    return &bt878[card_nr];
- }
  return NULL;
 }
 
-
 static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
 {
  static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
@@ -157,13 +153,19 @@ static int thomson_dtt7579_pll_set(struc
  #define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
  div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
 
- if (params->frequency < 542000000) cp = 0xb4;
- else if (params->frequency < 771000000) cp = 0xbc;
- else cp = 0xf4;
-
- if (params->frequency == 0) bs = 0x03;
- else if (params->frequency < 443250000) bs = 0x02;
- else bs = 0x08;
+ if (params->frequency < 542000000)
+  cp = 0xb4;
+ else if (params->frequency < 771000000)
+  cp = 0xbc;
+ else
+  cp = 0xf4;
+
+ if (params->frequency == 0)
+  bs = 0x03;
+ else if (params->frequency < 443250000)
+  bs = 0x02;
+ else
+  bs = 0x08;
 
  pllbuf[0] = 0xc0; // Note: non-linux standard PLL i2c address
  pllbuf[1] = div >> 8;
@@ -175,7 +177,6 @@ static int thomson_dtt7579_pll_set(struc
 }
 
 static struct mt352_config thomson_dtt7579_config = {
-
  .demod_address = 0x0f,
  .demod_init = thomson_dtt7579_demod_init,
  .pll_set = thomson_dtt7579_pll_set,
@@ -183,25 +184,26 @@ static struct mt352_config thomson_dtt75
 
 static int cx24108_pll_set(struct dvb_frontend* fe, struct 
dvb_frontend_parameters* params)
 {
-   u32 freq = params->frequency;
-
-   int i, a, n, pump;
-   u32 band, pll;
+ u32 freq = params->frequency;
 
+ int i, a, n, pump;
+ u32 band, pll;
 
-   u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
-        1576000,1718000,1856000,2036000,2150000};
-   u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
-        0x00102000,0x00104000,0x00108000,0x00110000,
-        0x00120000,0x00140000};
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+  1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+  0x00102000,0x00104000,0x00108000,0x00110000,
+  0x00120000,0x00140000};
 
-#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
  printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
 
  /* This is really the bit driving the tuner chip cx24108 */
 
- if(freq<950000) freq=950000; /* kHz */
- if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+ if (freq<950000)
+  freq = 950000; /* kHz */
+ else if (freq>2150000)
+  freq = 2150000; /* satellite IF is 950..2150MHz */
 
  /* decide which VCO to use for the input frequency */
  for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
@@ -228,25 +230,22 @@ static int cx24108_pll_set(struct dvb_fr
  cx24110_pll_write(fe,0x500c0000);
  cx24110_pll_write(fe,0x83f1f800);
  cx24110_pll_write(fe,pll);
-/*        writereg(client,0x56,0x7f);*/
+ //writereg(client,0x56,0x7f);
 
  return 0;
 }
 
 static int pinnsat_pll_init(struct dvb_frontend* fe)
 {
-   return 0;
+ return 0;
 }
 
-
 static struct cx24110_config pctvsat_config = {
-
  .demod_address = 0x55,
  .pll_init = pinnsat_pll_init,
  .pll_set = cx24108_pll_set,
 };
 
-
 static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct 
dvb_frontend_parameters* params)
 {
  struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
@@ -258,15 +257,23 @@ static int microtune_mt7202dtf_pll_set(s
  div = (36000000 + params->frequency + 83333) / 166666;
  cfg = 0x88;
 
- if (params->frequency < 175000000) cpump = 2;
- else if (params->frequency < 390000000) cpump = 1;
- else if (params->frequency < 470000000) cpump = 2;
- else if (params->frequency < 750000000) cpump = 2;
- else cpump = 3;
-
- if (params->frequency < 175000000) band_select = 0x0e;
- else if (params->frequency < 470000000) band_select = 0x05;
- else band_select = 0x03;
+ if (params->frequency < 175000000)
+  cpump = 2;
+ else if (params->frequency < 390000000)
+  cpump = 1;
+ else if (params->frequency < 470000000)
+  cpump = 2;
+ else if (params->frequency < 750000000)
+  cpump = 2;
+ else
+  cpump = 3;
+
+ if (params->frequency < 175000000)
+  band_select = 0x0e;
+ else if (params->frequency < 470000000)
+  band_select = 0x05;
+ else
+  band_select = 0x03;
 
  data[0] = (div >> 8) & 0x7f;
  data[1] = div & 0xff;
@@ -285,14 +292,11 @@ static int microtune_mt7202dtf_request_f
 }
 
 static struct sp887x_config microtune_mt7202dtf_config = {
-
  .demod_address = 0x70,
  .pll_set = microtune_mt7202dtf_pll_set,
  .request_firmware = microtune_mt7202dtf_request_firmware,
 };
 
-
-
 static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
 {
  static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
@@ -303,7 +307,6 @@ static int advbt771_samsung_tdtc9251dh0_
  static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
  static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
 
-
  mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
  udelay(2000);
  mt352_write(fe, mt352_reset, sizeof(mt352_reset));
@@ -326,25 +329,43 @@ static int advbt771_samsung_tdtc9251dh0_
  #define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
  div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
 
- if (params->frequency < 150000000) cp = 0xB4;
- else if (params->frequency < 173000000) cp = 0xBC;
- else if (params->frequency < 250000000) cp = 0xB4;
- else if (params->frequency < 400000000) cp = 0xBC;
- else if (params->frequency < 420000000) cp = 0xF4;
- else if (params->frequency < 470000000) cp = 0xFC;
- else if (params->frequency < 600000000) cp = 0xBC;
- else if (params->frequency < 730000000) cp = 0xF4;
- else cp = 0xFC;
-
- if (params->frequency < 150000000) bs = 0x01;
- else if (params->frequency < 173000000) bs = 0x01;
- else if (params->frequency < 250000000) bs = 0x02;
- else if (params->frequency < 400000000) bs = 0x02;
- else if (params->frequency < 420000000) bs = 0x02;
- else if (params->frequency < 470000000) bs = 0x02;
- else if (params->frequency < 600000000) bs = 0x08;
- else if (params->frequency < 730000000) bs = 0x08;
- else bs = 0x08;
+ if (params->frequency < 150000000)
+  cp = 0xB4;
+ else if (params->frequency < 173000000)
+  cp = 0xBC;
+ else if (params->frequency < 250000000)
+  cp = 0xB4;
+ else if (params->frequency < 400000000)
+  cp = 0xBC;
+ else if (params->frequency < 420000000)
+  cp = 0xF4;
+ else if (params->frequency < 470000000)
+  cp = 0xFC;
+ else if (params->frequency < 600000000)
+  cp = 0xBC;
+ else if (params->frequency < 730000000)
+  cp = 0xF4;
+ else
+  cp = 0xFC;
+
+ if (params->frequency < 150000000)
+  bs = 0x01;
+ else if (params->frequency < 173000000)
+  bs = 0x01;
+ else if (params->frequency < 250000000)
+  bs = 0x02;
+ else if (params->frequency < 400000000)
+  bs = 0x02;
+ else if (params->frequency < 420000000)
+  bs = 0x02;
+ else if (params->frequency < 470000000)
+  bs = 0x02;
+ else if (params->frequency < 600000000)
+  bs = 0x08;
+ else if (params->frequency < 730000000)
+  bs = 0x08;
+ else
+  bs = 0x08;
 
  pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
  pllbuf[1] = div >> 8;
@@ -356,19 +377,15 @@ static int advbt771_samsung_tdtc9251dh0_
 }
 
 static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
-
  .demod_address = 0x0f,
  .demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
  .pll_set = advbt771_samsung_tdtc9251dh0_pll_set,
 };
 
-
 static struct dst_config dst_config = {
-
  .demod_address = 0x55,
 };
 
-
 static int or51211_request_firmware(struct dvb_frontend* fe, const struct 
firmware **fw, char* name)
 {
  struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
@@ -398,10 +415,9 @@ static void or51211_reset(struct dvb_fro
   */
  /* reset & PRM1,2&4 are outputs */
  int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
- if (ret != 0) {
+ if (ret != 0)
   printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR "
          "(%i)\n", ret);
- }
  bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000);   /* Reset */
  msleep(20);
  /* Now set for normal operation */
@@ -417,7 +433,6 @@ static void or51211_sleep(struct dvb_fro
 }
 
 static struct or51211_config or51211_config = {
-
  .demod_address = 0x15,
  .request_firmware = or51211_request_firmware,
  .setmode = or51211_setmode,
@@ -425,7 +440,6 @@ static struct or51211_config or51211_con
  .sleep = or51211_sleep,
 };
 
-
 static int vp3021_alps_tded4_pll_set(struct dvb_frontend* fe, struct 
dvb_frontend_parameters* params)
 {
  struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
@@ -454,13 +468,11 @@ static int vp3021_alps_tded4_pll_set(str
 }
 
 static struct nxt6000_config vp3021_alps_tded4_config = {
-
  .demod_address = 0x0a,
  .clock_inversion = 1,
  .pll_set = vp3021_alps_tded4_pll_set,
 };
 
-
 static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 {
  int ret;
@@ -468,7 +480,7 @@ static void frontend_init(struct dvb_bt8
 
  switch(type) {
 #ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
+  case BTTV_DVICO_DVBT_LITE:
   card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
   if (card->fe != NULL) {
    card->fe->ops->info.frequency_min = 174000000;
@@ -479,24 +491,22 @@ static void frontend_init(struct dvb_bt8
 #endif
 
 #ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+  case BTTV_TWINHAN_VP3021:
 #else
- case BTTV_NEBULA_DIGITV:
+  case BTTV_NEBULA_DIGITV:
 #endif
   card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter);
-  if (card->fe != NULL) {
+  if (card->fe != NULL)
    break;
-  }
   break;
 
- case BTTV_AVDVBT_761:
+  case BTTV_AVDVBT_761:
   card->fe = sp887x_attach(&microtune_mt7202dtf_config, card->i2c_adapter);
-  if (card->fe != NULL) {
+  if (card->fe != NULL)
    break;
-  }
   break;
 
- case BTTV_AVDVBT_771:
+  case BTTV_AVDVBT_771:
   card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, 
card->i2c_adapter);
   if (card->fe != NULL) {
    card->fe->ops->info.frequency_min = 174000000;
@@ -505,7 +515,7 @@ static void frontend_init(struct dvb_bt8
   }
   break;
 
- case BTTV_TWINHAN_DST:
+  case BTTV_TWINHAN_DST:
   /* DST is not a frontend driver !!!  */
   state = (struct dst_state *) kmalloc(sizeof (struct dst_state), 
GFP_KERNEL);
   /* Setup the Card     */
@@ -522,54 +532,48 @@ static void frontend_init(struct dvb_bt8
 
   /* Attach other DST peripherals if any  */
   /* Conditional Access device   */
-  if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
+  if (state->dst_hw_cap & DST_TYPE_HAS_CA)
    ret = dst_ca_attach(state, &card->dvb_adapter);
-  }
-  if (card->fe != NULL) {
+
+  if (card->fe != NULL)
    break;
-  }
   break;
 
- case BTTV_PINNACLESAT:
+  case BTTV_PINNACLESAT:
   card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
-  if (card->fe != NULL) {
+  if (card->fe != NULL)
    break;
-  }
   break;
 
- case BTTV_PC_HDTV:
+  case BTTV_PC_HDTV:
   card->fe = or51211_attach(&or51211_config, card->i2c_adapter);
-  if (card->fe != NULL) {
+  if (card->fe != NULL)
    break;
-  }
   break;
  }
 
- if (card->fe == NULL) {
+ if (card->fe == NULL)
   printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x 
subsystem %04x/%04x\n",
          card->bt->dev->vendor,
          card->bt->dev->device,
          card->bt->dev->subsystem_vendor,
          card->bt->dev->subsystem_device);
- } else {
+ else
   if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
    printk("dvb-bt8xx: Frontend registration failed!\n");
    if (card->fe->ops->release)
     card->fe->ops->release(card->fe);
    card->fe = NULL;
   }
- }
 }
 
 static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 {
  int result;
 
- if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
-        THIS_MODULE)) < 0) {
+ if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name, 
THIS_MODULE)) < 0) {
   printk("dvb_bt8xx: dvb_register_adapter failed (errno = %d)\n", result);
   return result;
-
  }
  card->dvb_adapter.priv = card;
 
@@ -664,9 +668,8 @@ static int dvb_bt8xx_probe(struct device
  strncpy(card->card_name, sub->core->name, sizeof(sub->core->name));
  card->i2c_adapter = &sub->core->i2c_adap;
 
- switch(sub->core->type)
- {
- case BTTV_PINNACLESAT:
+ switch(sub->core->type) {
+  case BTTV_PINNACLESAT:
   card->gpio_mode = 0x0400c060;
   /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
          BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
@@ -675,7 +678,7 @@ static int dvb_bt8xx_probe(struct device
   break;
 
 #ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
+  case BTTV_DVICO_DVBT_LITE:
 #endif
   card->gpio_mode = 0x0400C060;
   card->op_sync_orin = 0;
@@ -686,25 +689,25 @@ static int dvb_bt8xx_probe(struct device
   break;
 
 #ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+  case BTTV_TWINHAN_VP3021:
 #else
- case BTTV_NEBULA_DIGITV:
+  case BTTV_NEBULA_DIGITV:
 #endif
- case BTTV_AVDVBT_761:
+  case BTTV_AVDVBT_761:
   card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
   card->op_sync_orin = 0;
   card->irq_err_ignore = 0;
   /* A_PWRDN DA_SBR DA_APP (high speed serial) */
   break;
 
- case BTTV_AVDVBT_771: //case 0x07711461:
+  case BTTV_AVDVBT_771: //case 0x07711461:
   card->gpio_mode = 0x0400402B;
   card->op_sync_orin = BT878_RISC_SYNC_MASK;
   card->irq_err_ignore = 0;
   /* A_PWRDN DA_SBR  DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
   break;
 
- case BTTV_TWINHAN_DST:
+  case BTTV_TWINHAN_DST:
   card->gpio_mode = 0x2204f2c;
   card->op_sync_orin = BT878_RISC_SYNC_MASK;
   card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
@@ -722,13 +725,13 @@ static int dvb_bt8xx_probe(struct device
    * RISC+FIFO ENABLE */
   break;
 
- case BTTV_PC_HDTV:
+  case BTTV_PC_HDTV:
   card->gpio_mode = 0x0100EC7B;
   card->op_sync_orin = 0;
   card->irq_err_ignore = 0;
   break;
 
- default:
+  default:
   printk(KERN_WARNING "dvb_bt8xx: Unknown bttv card type: %d.\n",
     sub->core->type);
   kfree(card);
@@ -751,7 +754,6 @@ static int dvb_bt8xx_probe(struct device
 
   kfree(card);
   return -EFAULT;
-
  }
 
  init_MUTEX(&card->bt->gpio_lock);
@@ -779,7 +781,8 @@ static int dvb_bt8xx_remove(struct devic
  card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
  dvb_dmxdev_release(&card->dmxdev);
  dvb_dmx_release(&card->demux);
- if (card->fe) dvb_unregister_frontend(card->fe);
+ if (card->fe)
+  dvb_unregister_frontend(card->fe);
  dvb_unregister_adapter(&card->dvb_adapter);
 
  kfree(card);



[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux