Am Mittwoch 20 Juli 2005 23:45 schrieb Marc Dirix: > I've just gotten this card yesterday. > > I don't seem to get things just right, I'm using 2.6.12.3. > > If I don't connect my dreambox receiver between the dish and the dvb-s > card I don't get any signal at all. If I connect it, I get poort signal. > > Using mplayer results in to slow video. While sound is working ok. > My cpu runs @ 2.8Ghz which should be ok I believe? > > > Using the windows software gives an ok picture, however I need to select > a channel 2 or more times before I get signal ok. In between it > complains the signal ain't ok. > > Signal on my dreambox is ok. > > This is szap output: > > status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe > |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe | unc > fffffffe |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe | > unc fffffffe |FE_HAS_LOCK status 1f | signal 2800 | snr 1300 | ber fffffffe > | unc fffffffe |FE_HAS_LOCK > > > Could this be a broken card? Or is this card really not supported? > > Thnx, > > > Marc Dirix > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb The sat-express cards have _very_ bad tuners. I had two of those cards and sold both again, because they couldn't get a lock most of the times due to low signal. The driver works. S.
