Marc Dirix wrote: > I've just gotten this card yesterday. > > I don't seem to get things just right, I'm using 2.6.12.3. > Can you try with a 2.6.12 and a CVS version with dst.c version 1.32 ? > If I don't connect my dreambox receiver between the dish and the dvb-s > card I don't get any signal at all. If I connect it, I get poort signal. > Do you mean to say that you have a very weak signal . ? > Using mplayer results in to slow video. While sound is working ok. > My cpu runs @ 2.8Ghz which should be ok I believe? > Quite sufficient. > > Using the windows software gives an ok picture, however I need to select > a channel 2 or more times before I get signal ok. In between it > complains the signal ain't ok. > Hmm .. you have an extremely low signal level. > Signal on my dreambox is ok. LG tuners aren't in the league, when it comes to signal sensitivity in comparison to Alps/Sharp tuners. > > This is szap output: > > status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe |FE_HAS_LOCK > status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe |FE_HAS_LOCK > status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe |FE_HAS_LOCK > status 1f | signal 2800 | snr 1300 | ber fffffffe | unc fffffffe |FE_HAS_LOCK > > > Could this be a broken card? Or is this card really not supported? > Card is supported. The signal level stuff needs to be a bit reworked, but some other things need to be worked prior to that. Manu
