New to the list and linux dvb. It's been a little frustrating
getting going, but I now have a kernel with support for a pair of
Air2PC 1st gen cards with the bcm3510 frontend.
I'm using the 2.6.12-git9 kernel patch on Fedora Core 3. Initially,
the flexcop-pci.ko module failed to load with this error:
Jun 28 08:25:46 dualxeon kernel: kobject_register failed for
Technisat/B2C2 FlexCop II/IIb/III PCI (-13)
Jun 28 08:25:46 dualxeon kernel: [<c021777d>] kobject_register+0x5d/
0x70
Jun 28 08:25:46 dualxeon kernel: [<c02a3b82>] bus_add_driver+0x72/0xc0
Jun 28 08:25:46 dualxeon kernel: [<c02250d8>] pci_register_driver
+0x98/0xb0
Jun 28 08:25:46 dualxeon kernel: [<c014bf72>] sys_init_module
+0x132/0x1d0
Jun 28 08:25:46 dualxeon kernel: [<c0103a8f>] sysenter_past_esp
+0x54/0x75
Turns out that having a forward slash "/" in the driver name is
illegal. With the following diff, the flexcop-pci.ko modules loads
correctly:
--- linux-2.6.12-clean/drivers/media/dvb/b2c2/flexcop-pci.c
2005-06-17 14:48:29.000000000 -0500
+++ linux-2.6.12/drivers/media/dvb/b2c2/flexcop-pci.c 2005-06-28
09:24:03.000000000 -0500
@@ -357,7 +357,7 @@
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
static struct pci_driver flexcop_pci_driver = {
- .name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
+ .name = "Technisat B2C2 FlexCop II IIb III PCI",
.id_table = flexcop_pci_tbl,
.probe = flexcop_pci_probe,
.remove = flexcop_pci_remove,
I'm sure flexcop-usb.c (and others) would need a similar diff also.
_Alan
