Manu Abraham wrote: > Islam Amer wrote: > >> Hi all. First of all I'd like to thank you for all your efforts. I am >> a happy twinhan user :) , I had reported earlier that my card >> didn't work on linux. I am now using it perfectly with 2.6.12-rc6-mm1 >> >> I figured out all the stuff about scan and szap and mplayer. I can scan >> transponders with vertical polarization, and watch channels on them that >> have vertical polarization perfectly. >> >> But horizontal scans fail and even if I write channel information >> manually szap or mplayer fail to tune. >> > > Can you check whether the attached patches fixes that.. patches to be > applied in the incremental order only.. > > Should be applied either to a vanilla 2.6.12, since all CVS changes > for the dst went in to mainline.. > > Or can be applied against the latest CVS, but would require the bttv > patches too, to work properly Tried these patches. Another (budget) card gives the following: 10714 MHz H | signal 48568 | snr db33 | ber 00000000 | unc 00000000 | LOCK 10729 MHz V | signal 49921 | snr dfec | ber 00000000 | unc 00000000 | LOCK 10743 MHz H | signal 46722 | snr df0e | ber 00000000 | unc 00000000 | LOCK In less than a second per transponder. With a virgin 2.6.12, I get locks on vertical channels only (reasonably fast, with no errors in the log that I remember). Horizontal channels don't tune. With these patches, I get no locks at all :( This is with a DSTCI card... Cheers, Allan.
