Dear all. I tried to get it work on Fedora Core 3, the kernel is linux-2.6.11.10. Fetching the driver from CVS on Jun 6. dmesg: usb 3-2: new full speed USB device using uhci_hcd and address 2 dvb_usb_dibusb_common: module license 'unspecified' taints kernel. dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw' to the 'Cypress AN2135' dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully initialized and connected. usbcore: registered new driver DiBcom based USB DVB-T devices (DiB3000M-B based) usb 3-2: USB disconnect, address 2 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 3-2: new full speed USB device using uhci_hcd and address 3 dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in warm state. dvb-usb: will use the device's hw PID filter. DVB: registering new adapter (AVerMedia AverTV DVBT USB1.1). DVB: registering frontend 0 (DiBcom 3000M-B DVB-T)... dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully initialized and connected. usb 3-2: string descriptor 0 read error: -71 usb 3-2: string descriptor 0 read error: -71 hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling... usb 3-2: USB disconnect, address 3 dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully deinitialized and disconnected. usb 3-2: new low speed USB device using uhci_hcd and address 4 usb 3-2: device descriptor read/64, error -71 usb 3-2: device descriptor read/64, error -71 usb 3-2: new low speed USB device using uhci_hcd and address 5 usb 3-2: device descriptor read/64, error -71 usb 3-2: device descriptor read/64, error -71 lsmod: evdev 7552 0 dvb_usb_dibusb_mb 8448 0 dvb_usb_dibusb_common 6020 1 dvb_usb_dibusb_mb dib3000mc 14848 1 dvb_usb_dibusb_common dvb_usb 18308 2 dvb_usb_dibusb_mb,dvb_usb_dibusb_common dvb_core 71208 1 dvb_usb firmware_class 7296 1 dvb_usb dib3000mb 12160 1 dvb_usb_dibusb_mb dib3000_common 2048 2 dib3000mc,dib3000mb dvb_pll 6532 3 dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb i2c_core 17424 3 dvb_usb_dibusb_mb,dvb_usb,dib3000_common After loading firmware, the power and lock LED all shutdown. I am not sure the firmware work correctly, there seems to be something the matter whit firmware by dmesg message. Does anybody got it work well using the firmware? If the firmware is ok, but some required modules that I did not load. Any suggestions can I do? Thanks for help. Steve. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050606/7ac272ee/attachment.htm
