Dear All !
I have an AVerMedia AverTV DVBT USB1.1(14aa:0001) that can't run a Fedora
Core 3.
This was with the driver fetched from CVS on May30nd.
[dmesg:]
usb 3-2: new full speed USB device using uhci_hcd and address 2
dvb_usb_dibusb_common: module license 'unspecified' taints kernel.
dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw' to the
'Cypress AN2135'
dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully initialized and
connected.
usbcore: registered new driver DiBcom based USB DVB-T devices (DiB3000M-B
based)
usb 3-2: USB disconnect, address 2
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 3-2: new full speed USB device using uhci_hcd and address 3
dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in warm state.
dvb-usb: will use the device's hw PID filter.
usb 3-2: string descriptor 0 read error: -71
DVB: registering new adapter (AVerMedia AverTV DVBT USB1.1).
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
d08c728f
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: dvb_usb_dibusb_mb dvb_usb_dibusb_common dib3000mc dvb_usb
dvb
_core firmware_class dvb_pll dib3000mb dib3000_common ipv6 af_packet video
therm
al fan container button battery ac i2c_i801 snd_intel8x0 snd_ac97_codec
snd_pcm
snd_timer snd soundcore snd_page_alloc b44 mii
CPU: 1
EIP: 0060:[<d08c728f>] Tainted: P VLI
EFLAGS: 00010286 (2.6.11.11-usb)
EIP is at dvbdev_get_free_id+0x15/0x47 [dvb_core]
eax: cd68b29c ebx: 00000004 ecx: 00000010 edx: 00000000
esi: 00000000 edi: 00000000 ebp: 00000004 esp: cfe49d3c
ds: 007b es: 007b ss: 0068
Process khubd (pid: 104, threadinfo=cfe48000 task=cffcfa40)
Stack: d08b0258 cd68b2b8 cd68b290 d08c72f8 cd68b290 00000004 cfe49d58
ce1d9424
cd68b000 cd68b2b8 cd68b310 cd68b290 d08b0258 cd68b2b8 00000b40
00000280
d08c9426 cd68b290 cd68b2b8 d08d8460 cd68b2b8 00000004 00000010
cd68b000
Call Trace:
[<d08c72f8>] dvb_register_device+0x37/0x18d [dvb_core]
[<d08c9426>] dvb_dmxdev_init+0x16c/0x1f1 [dvb_core]
[<d089f8bf>] dvb_usb_dvb_init+0xcd/0x1cc [dvb_usb]
[<d089e3ff>] dvb_usb_init+0xdd/0x1a1 [dvb_usb]
[<d089e833>] dvb_usb_device_init+0x107/0x1d6 [dvb_usb]
[<d08be218>] dibusb_probe+0x20/0x6c [dvb_usb_dibusb_mb]
[<c0276d2c>] usb_probe_interface+0x56/0x6e
[<c0234f47>] driver_probe_device+0x29/0x68
[<c0234fcd>] device_attach+0x47/0x9c
[<c01df1c3>] kobject_get+0x17/0x1e
[<c023527d>] bus_add_device+0x53/0x9b
[<c023840a>] device_pm_add+0x57/0x8d
[<c02341e6>] device_add+0xaf/0x151
[<c027e11f>] usb_set_configuration+0x332/0x453
[<c027915c>] usb_new_device+0x54/0x167
[<c027a06e>] hub_port_connect_change+0x1c1/0x3f0
[<c027a431>] hub_events+0x194/0x37c
[<c027a650>] hub_thread+0x37/0x10b
[<c012b3df>] autoremove_wake_function+0x0/0x4b
[<c010239e>] ret_from_fork+0x6/0x14
[<c012b3df>] autoremove_wake_function+0x0/0x4b
[<c027a619>] hub_thread+0x0/0x10b
[<c0100919>] kernel_thread_helper+0x5/0xb
Code: 24 20 89 44 24 08 8b 44 24 18 89 04 24 e8 9a 03 00 00 83 c4 14 c3 57
56 31
f6 53 <3>usb 3-2: string descriptor 0 read error: -71
8b 44 24 10 8b 5c 24 14 8b 78 0c 83 c0 0c 89 fa <8b> 0a 0f 18 01 90 39 d0 74
22
39 5a 10 74 04 89 ca eb ed 39 72
[lsmod:]
dvb_usb_dibusb_mb 7808 0
dvb_usb_dibusb_common 6916 1 dvb_usb_dibusb_mb
dib3000mc 15744 1 dvb_usb_dibusb_common
dvb_usb 17796 2
dvb_usb_dibusb_mb,dvb_usb_dibusb_common
dvb_core 75816 1 dvb_usb
firmware_class 8320 1 dvb_usb
dvb_pll 6532 3
dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb
dib3000mb 13056 1 dvb_usb_dibusb_mb
dib3000_common 2944 2 dib3000mc,dib3000mb
Any help appreciated!
Steve
Best Reqards.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050530/1005c4b5/attachment.htm
