Hi Vedran, On Wed, 25 May 2005, Vedran Rodic wrote: > Hello, I'm using the latest CVS drivers for Skystar2 on a 2.6.10 kernel. > > After some time of changing FTA DVB channels, the frontend reports that we're > successfully tuned to a transponder - there is a lock, signal, ber and snr > values are fine, but no data can be read from the dvr device. I've tested > with b2c2_flexcop debug=0x05, but there seem to be no errors in the log when > it stops with the stream. If i reload b2c2_flexcop_pci and b2c2_flexcop, it > starts working again. Unfortunately I have to tell you that this is a known problem/bug and there is no solution available yet. But we're working on that issue.... regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
