Hi Hartmut,
> Hm, that's not what i expected..
> The tda1004x module has undergone guite a lot of changes, i guess
> most of them with thr tda10046 in mind.
> I still think that the firmware upload fails at the first attempt.
> This might just be a timing issue in the initialization.
> please try a recent version of the module from the dvb-kernel cvs
> at linuxtv.org.
>
I tried the version that you checked in a few minutes before.
Now i get an Oops:
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem f0b10000 (revision 1, irq 22)
(0x13c2,0x1011).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
adapter has MAC addr = 00:d0:5c:03:25:c2
DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
saa7146: found saa7146 @ mem f0b12000 (revision 1, irq 23)
(0x13c2,0x1011).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
adapter has MAC addr = 00:d0:5c:02:9d:85
DVB: registering frontend 1 (Philips TDA10045H DVB-T)...
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
Unable to handle kernel paging request at virtual address ba13a918
printing eip:
f0b0296b
*pde = 00000000
Oops: 0002 [#2]
PREEMPT
Modules linked in: budget_ci tda1004x firmware_class budget_core
dvb_core saa7146 ttpci_eeprom stv0299 i2c_algo_pca i2c_algo_pcf
i2c_algo_bit i2c_dev rfcomm l2cap lirc_serial lirc_dev snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore
snd_page_alloc usbhid hci_usb bluetooth uhci_hcd ehci_hcd usbcore evdev
asb100 i2c_sensor i2c_i801 pcspkr nvidia agpgart cryptoloop loop bcm5700
CPU: 0
EIP: 0060:[<f0b0296b>] Tainted: P VLI
EFLAGS: 00010203 (2.6.11-gentoo-r9)
EIP is at pci_tbl+0xb/0xffffee31 [budget_ci]
eax: c9637ff0 ebx: dcd8eefc ecx: ffffffff edx: f0b02928
esi: dcd8ee00 edi: f0b39408 ebp: 00000000 esp: c9637f14
ds: 007b es: 007b ss: 0068
Process kdvb-fe-0 (pid: 13952, threadinfo=c9637000 task=ec3d7a00)
Stack: f0b15842 dcd8eefc c9637f2c f0b1786a c046fa00 c0556b40 c9637000
dcd8ee00
dcd8eefc f0b15ce8 dcd8eefc c9637000 c904be00 c011c18f dcd8eefc
c904be00
f0b34d09 dcd8eefc ffffffff ffffffff c9637000 f0b3517b dcd8eefc
0000000f
Call Trace:
[<f0b15842>] tda10045_fwupload+0x62/0x160 [tda1004x]
[<f0b15ce8>] tda10045_init+0x38/0x250 [tda1004x]
[<c011c18f>] daemonize+0xef/0x100
[<f0b34d09>] dvb_frontend_init+0x39/0x60 [dvb_core]
[<f0b3517b>] dvb_frontend_thread+0xab/0x560 [dvb_core]
[<c011693e>] finish_task_switch+0x2e/0x90
[<c01169b7>] schedule_tail+0x17/0x50
[<c0102632>] ret_from_fork+0x6/0x14
[<f0b350d0>] dvb_frontend_thread+0x0/0x560 [dvb_core]
[<f0b350d0>] dvb_frontend_thread+0x0/0x560 [dvb_core]
Code: e0 29 b0 f0 38 29 b0 f0 55 18 b0 f0 00 00 00 00 e0 29 b0 f0 48 29
b0 f0 00 00 00 00 00 00 00 00 31 11 00 00 46 71 00 00 c2 13 00 <00> 0c
10 00 00 00 00 00 00 00 00 00 00 40 29 b0 f0 31 11 00 00
> If this doesn't help and noone else can help you, you might send
> me the last version of the module that worked.
I think the last version that worked for me was the version in kernel
2.6.9. I will test that in the next days. Downgrading to the old kernel
causes some problems width udev.
regards, Marcel
