--- Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> wrote: > Arne Wörner wrote: > > I am just trying to install my Terratec Cinergy 1200 DVB-T PCI > > card. > > > > I do not know, which drivers I should use... > > In the moment I checked in "make menuconfig" > > 1. Budget cards > > 2. Budget cards with onboard CI connector > > 3. Budget cards with analog video inputs > > > I have the card runnung. The top level driver ist > budget-av. > Good to hear that... :-) I already thought, the card is not supported... This is what my kernel says now: <6>Linux video capture interface: v1.00 <6>bttv: driver version 0.9.15 loaded <6>bttv: using 8 buffers with 2080k (520 pages) each for capture <6>bttv: Host bridge needs ETBF enabled. <6>tvaudio: TV audio decoder + audio/video mux driver <6>tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z <4>saa7146: register extension 'budget dvb'. <4>saa7146: register extension 'budget dvb /w video in'. <4>saa7146: found saa7146 @ mem c4800000 (revision 1, irq 10) (0x153b,0x1157). <4>DVB: registering new adapter (Terratec Cinergy 1200 DVB-T). <4>adapter failed MAC signature check <4>encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff <4>DVB: register adapter0/demux0 @ minor: 4 (0x04) <4>DVB: register adapter0/dvr0 @ minor: 5 (0x05) <4>DVB: register adapter0/net0 @ minor: 7 (0x07) <4>DVB: register adapter0/ca0 @ minor: 6 (0x06) <6>budget-av: ci interface initialised. <6>KNC1-0: MAC addr = 00:0a:ac:01:97:fb <4>DVB: registering frontend 0 (Philips TDA10046H DVB-T)... <4>DVB: register adapter0/frontend0 @ minor: 3 (0x03) <4>saa7146: register extension 'budget_ci dvb'. <4>saa7146: register extension 'budget_patch dvb'. <4>saa7146: register extension 'dvb'. <6>bt878: AUDIO driver version 0.0.0 loaded <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 I inserted some further "printk"'s in the tda10046_fwupload() and tda10046_init() functions, but there are obviously no such messages in the boot.msg file... > > "frontends->Philips TDA10045/TDA10046 based" was not > > checkable... Why is that? > > Its selected automatically. > I c. > > I was asked for the firmware file > > /usr/lib/hotplug/firmware/dvb-ttpci-01.fw. I took a small > > binary > > from the drivers CD (...bin; a few hundred bytes). Is this > > good or bad? > > Where can I get the real firmware file? > > How can I integrate that firmware file into the kernel? > > > There is a script in the Documentation/dvb kernel directtory > named > "get_dvb_firmware. It downloads and extracts the firmware. You > need > to copy the file to: /usr/lib/hotplug/firmware/ > Check. I did this. :-) But my box still does not even try to upload the firmware to the card... Somehow SuSE Linux 8.1's module system does not work together with the 2.6.11 kernel (it says: "lsmod: QM_MODULES: Function not implemented"). Do you think, I should try to get this module stuff up and running? > Good luck > Hartmut Thank you for your reply. :-) -Arne Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html
