Hello u all :) I'm here again, trying and trying again to watch TV on my Gentoo ;) I have a Hauppauge wintv-dvb s card, which worked flawlessly a few months ago, with standalone dvb drivers. I did get all the channels, scrambled or not ( I had an official subscribing to canal satellite) I've recently upgraded my box, and I'm running a 2.6.11 kernel . Te dvb drivers are now in the kernel. As you can see below, everything seems to be OK, but I can't see or hear nothing. I think the CI interface doesn't come up. I'm in a country with no FTA channel, and I still have a subscribing ( everything works well on windows ) Has any of u experienced the same pb, and found a solution ? Is there something to do to initialise or getting the CAM up ? Thanks in advance :) regards, JF Here are some relevant informations : dmesg: ......... eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 saa7146: register extension 'dvb'. PCI: Found IRQ 11 for device 0000:00:0a.0 IRQ routing conflict for 0000:00:07.2, have irq 9, want irq 11 saa7146: found saa7146 @ mem cea1e000 (revision 1, irq 11) (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X). adapter has MAC addr = 00:d0:5c:1f:0a:56 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: adac type set to 0 @ card 0 saa7146_vv: saa7146 (0): registered device video0 [v4l2] ves1x93: Detected ves1893a rev2 DVB: registering frontend 0 (VLSI VES1x93 DVB-S)... dvb-ttpci: found av7110-0. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) devfs_mk_dev: could not append to parent for vcc/a2 devfs_mk_dev: could not append to parent for vcc/3 ............... lsmod : ..... dvb_ttpci 90920 0 dvb_core 76200 1 dvb_ttpci saa7146_vv 45568 1 dvb_ttpci video_buf 17284 1 saa7146_vv saa7146 15396 2 dvb_ttpci,saa7146_vv ves1820 5636 1 dvb_ttpci stv0299 9860 1 dvb_ttpci tda8083 5892 1 dvb_ttpci stv0297 8704 1 dvb_ttpci sp8870 7308 1 dvb_ttpci ves1x93 6532 1 dvb_ttpci ttpci_eeprom 2432 1 dvb_ttpci ..... output : ...... reading channels from file '/video/channels.conf' zapping to 5 'TF1': sat 0, frequency = 11534 MHz H, symbolrate 30000000, vpid = 0x00a4, apid = 0x0060 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 07 | signal 7b7b | snr 7878 | ber 0002eb12 | unc ffffffff | status 1f | signal 7a7a | snr 8080 | ber 00194790 | unc ffffffff | FE_HAS_LOCK status 1f | signal 8383 | snr 7f7f | ber 00194790 | unc ffffffff | FE_HAS_LOCK status 1f | signal 7777 | snr 7f7f | ber 00194790 | unc ffffffff | FE_HAS_LOCK status 1f | signal 7e7e | snr 8080 | ber 00194790 | unc ffffffff | FE_HAS_LOCK status 07 | signal 7c7c | snr 7d7d | ber 00194790 | unc ffffffff | status 1f | signal 7b7b | snr 8383 | ber 00194790 | unc ffffffff | FE_HAS_LOCK ....................... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050513/e1f23463/attachment.htm
