Dne st 11. kv?tna 2005 23:51 jste napsal(a): > Hi Michal, > > On Wed, 2005-05-11 at 23:37 +0200, Michal Semler wrote: > > could you please include pluto2 driver into dvb-kernel in vanilla tree > > before 2.6.12 release? > > I asked Johannes _not_ to send it, because of the lockup problems > probably causing data loss. Also I think that it is too late to include > a new driver now. So until 2.6.13 comes out you will have to use the > driver from CVS. OK. there are these problems I experienced in today usage: 1]Card doesn't tunes at first time. Second time it works: cijoml@notas$ > mplayer dvb://0@Nova. MPlayer 1.0pre7-3.4.4 (C) 2000-2005 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 9) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Playing dvb://0@xxxxxx The username option must be >= 1: 0 Struct dvbin, field username parsing error: 0 code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001 Released under the GPL. Latest version available from http://www.linuxstb.org/ dvb_tune Freq: 506000000 Not able to lock to the signal on the given frequency dvb_tune, TUNING FAILED ERROR, COULDN'T SET CHANNEL 1: Failed to open dvb://0@Nova. Exiting... (End of file) cijoml@notas$ > mplayer dvb://0@Nova. MPlayer 1.0pre7-3.4.4 (C) 2000-2005 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 9) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Playing dvb://0@xxxxxx The username option must be >= 1: 0 Struct dvbin, field username parsing error: 0 code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001 Released under the GPL. Latest version available from http://www.linuxstb.org/ dvb_tune Freq: 506000000 Win32 LoadLibrary failed to load: avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll TS file format detected. DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1, PROBING UP TO 2000000, PROG: 0 VIDEO MPEG2(pid=513)AUDIO MPA(pid=661) NO SUBS (yet)! PROGRAM N. 0 Opened TS demuxer, audio: 50(pid 661), video: 10000002(pid 513)...POS=65800 VIDEO: MPEG2 704x576 (aspect 2) 25.000 fps 10000.0 kbps (1250.0 kbyte/s) ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 704 x 576 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG-1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le... AF_pre: 48000Hz/2ch/s16le AO: [oss] 48000Hz 2ch s16le (2 bps) Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le... Starting playback... VDec: vo config request - 704 x 576 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 704x576 => 768x576 Planar YV12 A:83621.8 V:83617.9 A-V: 3.907 ct: 0.108 557/557 29% 11% 22.4% 40 0 Exiting... (Quit) 2] Video stream gets very slow after about 5 seconds, sound works fine 3] during playing I still see in dmesg Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 tda1004x: waiting for firmware upload (dvb-fe-tda10046.fw)... tda1004x: using firmware v20 tda1004x: firmware upload complete pluto2 0000:03:00.0: overflow irq (9) ^^^^ 4] video stream is still little buggy - viz previous post with videos 5] computer freezes one time during playing with driver and card: loading/unloading modules Hope this will help debuging the driver Michal > > Regards, > Andreas -- S pozdravem Michal Semler
