Hi, all This is part 2 of the tda1004x driver patch. It requires part 1. It introduces the new parameters of the tda1004x_config struct to the following DVB-T board drivers: - budget-av - budget-ci - pluto2 The patch for pluto2 is mandatory, one parameter changed its name. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx >----------------------------- snip ----------------------------< diff -uprN dvb-kernel/linux/drivers/media/dvb/ttpci/budget-av.c dvb-kernel-new/linux/drivers/media/dvb/ttpci/budget-av.c --- dvb-kernel/linux/drivers/media/dvb/ttpci/budget-av.c 2005-04-05 00:50:50.000000000 +0200 +++ dvb-kernel-new/linux/drivers/media/dvb/ttpci/budget-av.c 2005-05-10 23:37:30.000000000 +0200 @@ -695,8 +695,12 @@ static struct tda1004x_config philips_tu .demod_address = 0x8, .invert = 1, .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_init = philips_tu1216_pll_init, .pll_set = philips_tu1216_pll_set, + .pll_sleep = NULL, .request_firmware = philips_tu1216_request_firmware, }; diff -uprN dvb-kernel/linux/drivers/media/dvb/ttpci/budget-ci.c dvb-kernel-new/linux/drivers/media/dvb/ttpci/budget-ci.c --- dvb-kernel/linux/drivers/media/dvb/ttpci/budget-ci.c 2005-03-17 04:16:12.000000000 +0100 +++ dvb-kernel-new/linux/drivers/media/dvb/ttpci/budget-ci.c 2005-05-10 23:37:40.000000000 +0200 @@ -838,8 +838,12 @@ static struct tda1004x_config philips_td .demod_address = 0x8, .invert = 0, .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_init = philips_tdm1316l_pll_init, .pll_set = philips_tdm1316l_pll_set, + .pll_sleep = NULL, .request_firmware = philips_tdm1316l_request_firmware, }; diff -uprN dvb-kernel/linux/drivers/media/dvb/pluto2/pluto2.c dvb-kernel-new/linux/drivers/media/dvb/pluto2/pluto2.c --- dvb-kernel/linux/drivers/media/dvb/pluto2/pluto2.c 2005-05-08 23:39:59.000000000 +0200 +++ dvb-kernel-new/linux/drivers/media/dvb/pluto2/pluto2.c 2005-05-11 21:48:13.000000000 +0200 @@ -484,8 +484,12 @@ static int pluto2_request_firmware(struc static struct tda1004x_config pluto2_fe_config __devinitdata = { .demod_address = I2C_ADDR_TDA10046 >> 1, .invert = 1, - .n_i2c = 3, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_set = lg_tdtpe001p_pll_set, + .pll_sleep = NULL, .request_firmware = pluto2_request_firmware, };