Thank you Magnus, an upgrade solved my problem. I use Gentoo Linux 2.6.11-r6 and the stable branch for nearly everything else. The stable version of udev is 45 and the unstable (~x86) version is 56. Version 56 solves the problem I was experiencing. I noticed that version 56 also contains the patch referred to in the documentation. On Wednesday 11 May 2005 11:04 am, dvblist wrote: > You probably need to upgrade your udev, udev-057-4 works > fine for me. > > // Magnus > > On Wed, 2005-05-11 at 10:21 -0500, Mac Michaels wrote: > > I am developing a new ATSC driver based on cx88 with > > lgdt3302 demodulator. I am getting /dev files that are > > not what the dvb utilities expect. Instead > > of /dev/dvb/adapter0/demux0 I get /dev/dvb0.demux0. > > I found some scripts at > > http://www.linuxtv.org/cgi-bin/viewcvs.cgi/dvb-kernel/l > >inux/Documentation/dvb/udev.txt?rev=1.2&view=markup > > Unfortunately there was no changes after implementing > > them. Where should I look next? > > > > Running linux-6.11-gentoo-r6. cx88 code is from CVS at > > linuxtv.org with modules copied into the > > drivers/media/video/cx88 modules directory of linux. > > > > Following are the results of installing the cx88-dvb > > module. It uses the lgdt3302 driver I am developing and > > detects my card properly. > > bash-2.05b# modprobe cx88-dvb > > > > bash-2.05b# ls -l /dev/dvb* > > crw-rw---- 1 root root 212, 4 May 10 17:09 > > /dev/dvb0.demux0 crw-rw---- 1 root root 212, 5 May 10 > > 17:09 /dev/dvb0.dvr0 crw-rw---- 1 root root 212, 3 May > > 10 > > 17:09 /dev/dvb0.frontend0 > > crw-rw---- 1 root root 212, 7 May 10 17:09 > > /dev/dvb0.net0 > > > > bash-2.05b# lsmod > > Module Size Used by > > cx88_dvb 8324 0 > > cx8802 10884 1 cx88_dvb > > mt352 7172 1 cx88_dvb > > lgdt3302 8324 1 cx88_dvb > > or51132 10756 1 cx88_dvb > > video_buf_dvb 7044 1 cx88_dvb > > dvb_core 85672 1 video_buf_dvb > > cx22702 9732 1 cx88_dvb > > dvb_pll 4612 4 > > cx88_dvb,lgdt3302,or51132,cx22702 > > snd_seq_midi 9120 0 > > snd_cmipci 32512 1 > > snd_opl3_lib 11520 1 snd_cmipci > > snd_hwdep 10016 1 snd_opl3_lib > > snd_mpu401_uart 8448 1 snd_cmipci > > snd_rawmidi 25760 2 > > snd_seq_midi,snd_mpu401_uart tuner > > 22948 0 > > cx8800 32652 0 > > cx88xx 55584 3 cx88_dvb,cx8802,cx8800 > > video_buf 22532 5 > > cx88_dvb,cx8802,video_buf_dvb,cx8800,cx88xx > > ir_common 7428 1 cx88xx > > tveeprom 13208 1 cx88xx > > v4l1_compat 14212 1 cx8800 > > v4l2_common 6016 1 cx8800 > > btcx_risc 5128 3 cx8802,cx8800,cx88xx > > videodev 10368 2 cx8800,cx88xx > > nvidia 3470556 12 > > > > bash-2.05b# dmesg > > cx2388x dvb driver version 0.0.4 loaded > > ACPI: PCI interrupt 0000:02:0e.2[A] -> GSI 18 (level, > > low) -> IRQ 18 > > cx88[0]/2: found at 0000:02:0e.2, rev: 3, irq: 18, > > latency: 32, mmio: 0xed000000 > > cx88[0]/2: cx2388x based dvb card > > DVB: registering new adapter (cx88[0]). > > DVB: registering frontend 0 (DViCO - FusionHDTV 3 > > Gold)... > > > > > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-d > >vb
