Hi, I have a same problem. Allmost. I made same things in same order what people adviced. Followed these "instructions": http://www.linuxtv.org/pipermail/linux-dvb/2005-March/000785.html Ok, I got -allmos- my card working. But then something happened and nothing works anymore :D lsmod Module Size Used by saa7134_dvb 5508 0 mt352 7428 1 saa7134_dvb video_buf_dvb 5508 1 saa7134_dvb tda1004x 14980 1 saa7134_dvb tda9887 13848 0 tuner 26920 0 saa7134 104404 1 saa7134_dvb video_buf 18436 3 saa7134_dvb,video_buf_dvb,saa7134 ir_common 7300 1 saa7134 dmesg | grep saa7134 (cutted card list what isn't important in my opinion) root@scourge:/dev# dmesg | grep saa7134 saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xec000000 saa7134: <rant> saa7134: Congratulations! Your TV card vendor saved a few saa7134: cents for a eeprom, thus your pci board has no saa7134: subsystem ID and I can't identify it automatically saa7134: </rant> saa7134: I feel better now. Ok, here are the good news: saa7134: You can use the card=<nr> insmod option to specify saa7134: which board do you have. The list: saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] saa7134[0]: board init: gpio is cc04000 saa7134[0]: Huh, no eeprom present (err=-5)? saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default] saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xec000000 saa7134[0]: subsystem: 1131:0000, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,insmod option] saa7134[0]: board init: gpio is cc04000 saa7134[0]: Huh, no eeprom present (err=-5)? saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default] saa7134[0]: pinnacle 300i dvb setup saa7134[0]: frontend initialization failed saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xec000000 This comes _three_ times (I know that I messed something but don't know what / how to fix it) lscpi -v root@scourge:/# lspci -v 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at e8000000 (32-bit, prefetchable) [size=32M] Capabilities: [40] AGP version 3.0 Capabilities: [60] #08 [2001] 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:01.0 ISA bridge: nVidia Corporation: Unknown device 0080 (rev a3) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0 Capabilities: [48] #08 [01e1] 00:01.1 SMBus: nVidia Corporation: Unknown device 0084 (rev a1) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: 66Mhz, fast devsel, IRQ 5 I/O ports at e500 [size=32] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation: Unknown device 0087 (rev a1) (prog-if 10 [OHCI]) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 20 Memory at ec103000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation: Unknown device 0087 (rev a1) (prog-if 10 [OHCI]) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 21 Memory at ec104000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.2 USB Controller: nVidia Corporation: Unknown device 0088 (rev a2) (prog-if 20 [EHCI]) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 21 Memory at ec105000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 00:04.0 Bridge: nVidia Corporation: Unknown device 008c (rev a3) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 21 Memory at ec100000 (32-bit, non-prefetchable) [size=4K] I/O ports at e000 [size=8] Capabilities: [44] Power Management version 2 00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 008a (rev a1) Subsystem: DFI Inc: Unknown device 1001 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 20 I/O ports at e100 [size=256] I/O ports at e200 [size=128] Memory at ec101000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:08.0 PCI bridge: nVidia Corporation: Unknown device 008b (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ec000000-ec0fffff 00:09.0 IDE interface: nVidia Corporation: Unknown device 0085 (rev a3) (prog-if 8a [Master SecP PriP]) Subsystem: nVidia Corporation: Unknown device 5b25 Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 00:0b.0 IDE interface: nVidia Corporation: Unknown device 008e (rev a3) (prog-if 85 [Master SecO PriO]) Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 22 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at ea00 [size=16] I/O ports at eb00 [size=128] Capabilities: [44] Power Management version 2 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 Memory behind bridge: ea000000-ebffffff Prefetchable memory behind bridge: e0000000-e7ffffff 01:08.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) Subsystem: Philips Semiconductors: Unknown device 0000 Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 01:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: DFI Inc: Unknown device 1006 Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at ec001000 (32-bit, non-prefetchable) [size=2K] I/O ports at d000 [size=128] Capabilities: [50] Power Management version 2 02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA]) Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 19 Memory at ea000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 lspci -n root@scourge:/# lspci -n 00:00.0 Class 0600: 10de:01e0 (rev c1) 00:00.1 Class 0500: 10de:01eb (rev c1) 00:00.2 Class 0500: 10de:01ee (rev c1) 00:00.3 Class 0500: 10de:01ed (rev c1) 00:00.4 Class 0500: 10de:01ec (rev c1) 00:00.5 Class 0500: 10de:01ef (rev c1) 00:01.0 Class 0601: 10de:0080 (rev a3) 00:01.1 Class 0c05: 10de:0084 (rev a1) 00:02.0 Class 0c03: 10de:0087 (rev a1) 00:02.1 Class 0c03: 10de:0087 (rev a1) 00:02.2 Class 0c03: 10de:0088 (rev a2) 00:04.0 Class 0680: 10de:008c (rev a3) 00:06.0 Class 0401: 10de:008a (rev a1) 00:08.0 Class 0604: 10de:008b (rev a3) 00:09.0 Class 0101: 10de:0085 (rev a3) 00:0b.0 Class 0101: 10de:008e (rev a3) 00:1e.0 Class 0604: 10de:01e8 (rev c1) 01:08.0 Class 0480: 1131:7134 (rev 01) 01:0d.0 Class 0c00: 1106:3044 (rev 80) 02:00.0 Class 0300: 10de:0322 (rev a1) (day after of writing 99% of the message) sombody told me to look dmesg | tail found this interesting (there was something about agpcard what doesn't interest me at the moment) mt352_read_register: readreg error (reg=127, ret==-5) saa7134[0]: frontend initialization failed My tv-card is Pinnacle Mediacenter 300i and my linux kernel is 2.6.12-rc4 Using kernel based drivers, they seem to work quite fine. I hope that I gave enough technical data to help me. If I didn't, I will give more :) (direct mailing address: ville@xxxxxxxxxxxxxxx scourge@xxxxxxxxxxxx) Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050510/1213d65a/attachment.htm
