nyk wrote: > On Wed, Apr 13, 2005 at 09:34:27PM +0200, Markus Posch wrote: > >>nyk schrieb: >> >>>On Wed, Apr 13, 2005 at 09:51:36AM +0200, Markus Posch wrote: >>> >>> >>>>Hy @all. >>>> >>>>Now I had installet the release of kubuntu 5.04. >>>> >>>>but there is still this problem: >>>> >>>>when i connect the dec 3000 i got this in dmesg: >>>> >>>>Apr 13 09:15:46 localhost kernel: usb 3-1: new full speed USB device >>>>using uhci_hcd and address 2 >>>>Apr 13 09:15:57 localhost usb.agent[8890]: ttusb_dec: loaded >>>>successfully >>>>Apr 13 09:15:57 localhost kernel: ttusb_dec: Firmware >>>>1.15<3>ttusb_dec_boot_dsp: Firmware (dvb-ttusb-dec-3000s.fw) unavailable. >>>>Apr 13 09:15:57 localhost kernel: usb_unlink_urb() is deprecated for >>>>synchronous unlinks. Use usb_kill_urb() instead. >>>>Apr 13 09:15:57 localhost last message repeated 3 times >>>>Apr 13 09:15:57 localhost kernel: usbcore: registered new driver ttusb-dec >>>> >>>>the firmware has the right name and is placd in /usr/lib/hotplug/firmware. >>>> >>>>the script dvb.sh and the rules are added. >>>> >>>>but there is still no adapter and no frontent in /dev. >>> >>> >>>Make sure udev is up to date. >>> >>>Make sure your kernel has CONFIG_FW_LOADER=m or CONFIG_FW_LOADER=y >>> >>>It might also help to modprobe the modules (modprobe ttusb_dec) before >>>plugging in the dec. Try unplugging and re-plugging in the dec. >>> >>>hth >> >>thanks, >> >>how can i see the my version of udev? (i think on the newest kubuntu is >>should be the right one) >> >>today i saw the strangest thing. >> >>i called a friend who is working in the same firm. he said i should copy >>the firmware to /lib/firmware. >>i made this, connected the dec => firmware loadet. >> >>ok. i go home from the firm, connected the dec => same error again?????? >> >>i connected and disconnectet again and again, but the error is always >>the same. >> >>now i am confused more then before. >> > > AIUI ubuntu has the same file layout as debian, so the firmware should > be in /usr/lib/hotplug/firmware. The only other thing I can think of is > that the permissions of the firmware file are wrong... is the file world > readable - that would make sure the hotplug process can read the file... > > nyk hallo again, now i installed the newest version of gentoo (only to try). but no way to get the dec working. the dec is now build into the kernel and not a module. but there was an interessting message in dmesg when i connect the dec. Apr 26 07:28:37 localhost wait_for_sysfs[27603]: either wait_for_sysfs (udev 045) needs an update to handle the device '/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <linux-hotplug-devel@xxxxxxxxxxxxxxxxxxxxx> Apr 26 09:28:42 localhost ttusb_dec: Firmware 1.15<3>ttusb_dec_boot_dsp: Firmware (dvb-ttusb-dec-3000s.fw) unavailable. I think there is a problem with my usb. Anyone any idea? greets markus
