Hi Andreas, I got fresh CVS without pluto_fe, compiled, updated firmware and plugged it to hotplug's location, but no success: notas:/home/cijoml# lsmod Module Size Used by tda1004x 14212 0 pluto2 6656 0 dvb_core 74920 1 pluto2 i2c_algo_bit 8584 1 pluto2 firmware_class 7680 1 pluto2 pluto_fe 56964 1 pluto2 i2c_core 18064 4 tda1004x,pluto2,i2c_algo_bit,pluto_fe hci_usb 12808 8 rfcomm 34204 6 hidp 12160 4 l2cap 22916 18 rfcomm,hidp bluetooth 43012 16 hci_usb,rfcomm,hidp,l2cap hostap_cs 53144 1 hostap 105096 1 hostap_cs nsc_ircc 15036 0 irda 119224 3 nsc_ircc crc_ccitt 1920 1 irda ide_cd 36356 0 cdrom 37280 1 ide_cd parport_pc 31812 0 parport 31816 1 parport_pc 8139too 20864 0 mii 4224 1 8139too snd_intel8x0m 15044 3 8250_pci 17024 0 8250 21700 1 8250_pci serial_core 19200 1 8250 snd_intel8x0 28864 1 snd_ac97_codec 72824 2 snd_intel8x0m,snd_intel8x0 snd_pcm_oss 48800 0 snd_mixer_oss 17664 1 snd_pcm_oss snd_pcm 81928 6 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 21508 1 snd_pcm snd 46692 13 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer snd_page_alloc 7556 3 snd_intel8x0m,snd_intel8x0,snd_pcm ehci_hcd 31496 0 usbhid 33280 0 uhci_hcd 28816 0 nls_iso8859_2 4480 1 ntfs 175504 1 rtc 10552 0 dmesg: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:03:00.0 to 64 pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) DVB: registering new adapter (pluto2). pluto2 0000:03:00.0: board revision 15.255 pluto2 0000:03:00.0: MAC ff:ff:ff:ff:ff:ff pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2: could not attach frontend pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) pluto2 0000:03:00.0: overflow irq (1) Michal Dne po 25. dubna 2005 23:56 jste napsal(a): > Hi Michal, > > On Mon, 2005-04-25 at 23:07 +0200, Michal Semler wrote: > > I tried move it earlyer, but without success: > > please try a cvs update. Note that pluto_fe is not used anymore, use > tda1004x instead. You'll need to put the demod firmware > to /usr/lib/hotplug/firmware. A script to download and extract the > firmware can be found at linux/Documentation/dvb/get_dvb_firmware. > There's also a copy of the firmware in cvs at > dvb-kernel/firmware/dvb-fe-tda10046.fw. > > Regards, > Andreas -- S pozdravem Michal Semler
