[linux-dvb] Patch for Nebula DVB-T with MT352 Frontend

[dvb at saywell.net (Mike Saywell)]

Hi,

I've knocked up a patch to make the new Nebula card work.  It is based
on the initial dvb-bt8xx.c posted by Seb James to the list a few days
ago.

If somebody with the older style card could apply this patch and check
everything is working for the still that would be very helpful.  I don't
*think* I've broken anything.

Apologies if the code is a bit rough, it's the first time I've ever done
any driver code! ;)

Cheers,

Mike Saywell
-------------- next part --------------
--- dvb-bt8xx.c.old	2005-04-18 13:41:46.000000000 +0100
+++ dvb-bt8xx.c	2005-04-18 14:13:33.000000000 +0100
@@ -461,6 +461,94 @@
 };
 
 
+
+static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
+{
+	static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+	static u8 mt352_reset [] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; 
+	static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+	mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+	return 0;
+}
+
+
+static int digitv_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+	u32 div;
+	struct dvb_ofdm_parameters *op = &params->u.ofdm;
+
+	#define IF_FREQUENCYx6 217 
+	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+	pllbuf[0] = 0xc2;
+	pllbuf[1] = (div >> 8) & 0x7F;
+	pllbuf[2] = div & 0xFF;
+	pllbuf[3] = 0x85;
+
+	dprintk("frequency %u, div %u\n", params->frequency, div);
+
+	if (params->frequency < 470000000) {
+		pllbuf[4] = 0x02;
+	}
+
+	else if (params->frequency > 823000000) {
+		pllbuf[4] = 0x88;
+	}
+
+	else {
+		pllbuf[4] = 0x08;
+	}
+
+	if(op->bandwidth == 8) {
+		pllbuf[4] |= 0x04;
+	}
+	
+	return 0;
+
+}
+
+static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
+{
+	/*
+	 * Reset the frontend, must be called before trying
+	 * to initialise the MT352 or mt352_attach
+	 * will fail.
+	 *
+	 * Presumably not required for the NXT6000 frontend.
+	 *
+	 */
+
+	int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
+	if (ret != 0) {
+		printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR "
+		       "(%i)\n", ret);
+	}
+
+	/* Pulse the reset line */
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08);	/* High */
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x00);	/* Low  */
+	msleep(100);
+	
+	bttv_write_gpio(bt->bttv_nr, 0x08, 0x08);	/* High */
+}
+
+
+static struct mt352_config digitv_alps_tded4_config = {
+	.demod_address = 0x0a,
+	.demod_init = digitv_alps_tded4_demod_init,
+	.pll_set = digitv_alps_tded4_pll_set,
+};
+
+
 static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 {
 	int ret;
@@ -483,12 +571,27 @@
 #else
 	case BTTV_NEBULA_DIGITV:
 #endif
+		/* FIXME: Should probably choose the frontend intelligently rather than trying each in turn. */
+
+		/* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
 		card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter);
+
 		if (card->fe != NULL) {
+			dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
+			break;
+		}
+
+		/* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
+		digitv_alps_tded4_reset(card);
+		card->fe = mt352_attach(&digitv_alps_tded4_config, card->i2c_adapter);
+		
+		if (card->fe != NULL) {
+			dprintk ("dvb_bt8xx: a mt352 was not detected on your digitv card\n");
 			break;
 		}
 		break;
 
+
 	case BTTV_AVDVBT_761:
 		card->fe = sp887x_attach(&microtune_mt7202dtf_config, card->i2c_adapter);
 		if (card->fe != NULL) {