I compiled it with 2.6.11.5 vanilla so this is compatible kernel, but I had to set =n to get modules to load Freezing makes me sad :( Michal Dne ?t 31. b?ezna 2005 18:49 Kenneth Aafl?y napsal(a): > Hi, > > On Thursday 31 March 2005 14:57, Michal Semler wrote: > > > > I have problems with 2.6.11.5, todays CVS of dvb-kernel and pluto2 > > > > driver: > > > > > > > > compiled fresh 2.6.11.5, > > > > cvs update dvb-kernel > > > > compiled it > > > > cp all .ko modules to 2.6.11.5 lib directory > > > > depmod -a > > > > modprobe pluto2 > > > > > > > > and in dmesg I only see: > > > > > > > > pluto2: disagrees about version of symbol dvb_register_adapter > > > > pluto2: Unknown symbol dvb_register_adapter > > > > > > Do you have old dvb modules in > > > /lib/modules/2.6.11.5/kernel/drivers/media/dvb/ ? > > > > > > Remove them. > > > > I removed them :) Problem was in > > > > > CONFIG_MODVERSIONS=y > > > CONFIG_MODULE_SRCVERSION_ALL=y > > > > As Andreas told me. > > > > Now pluto2 module gets to load, but imeditially after pressing enter, > > kernel totally freezes and nothing is written into console :( > > Is this your settings now? Or did you disable modversions? > They are there to protect you from loading modules built with incompatible > sources, so if you remove those that protection goes away, and as a result > you will be experiencing a lot of strange problems. > > Kenneth > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb -- S pozdravem Michal Semler
