Hi all, I have just touched DVB-S since one week ago. I have a Hauppauge WinTV Nexus-S rev2.2 card, while having Redhat Enterprise 3.95 installed on a DELL Precision 670 workstation. Now I use Linux kernel 2.6.11.6 with DVB modules selected. I modified the udev configuration so that /dev/dvb/adapter0/* are all generated correctly, while I downloaded and placed the firmware into /lib/firmware as dvb-ttpci-01.fw. Then I created a initial-tuning-data file to scan channels with dvbscan based on Asiasat3S-105.5E transmitter. Many channels are found, so I use szap to select one channel I would like to watch. However both mp4live and xawtv, based on v4l2 API, do not work. Nothing can be seen except of blank screen. So can anybody help me? Below is the log relevant. Thanks. Xingbo ------------------------------ Mar 27 21:12:30 aaa kernel: Linux video capture interface: v1.00 Mar 27 21:12:30 aaa kernel: saa7146: register extension 'dvb'. Mar 27 21:12:30 aaa kernel: ACPI: PCI interrupt 0000:06:0d.0[A] -> GSI 17 (level, low) -> IRQ 193 Mar 27 21:12:30 aaa kernel: saa7146: found saa7146 @ mem f897a600 (revision 1, irq 193) (0x13c2,0x0003). Mar 27 21:12:31 aaa kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). Mar 27 21:12:31 aaa kernel: adapter has MAC addr = 00:d0:5c:22:8c:9c Mar 27 21:12:31 aaa kernel: dvb-ttpci: gpioirq unknown type=0 len=0 Mar 27 21:12:31 aaa kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d Mar 27 21:12:31 aaa kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface Mar 27 21:12:31 aaa kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected Mar 27 21:12:31 aaa kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] Mar 27 21:12:31 aaa kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... Mar 27 21:12:31 aaa kernel: dvb-ttpci: found av7110-0. Mar 27 21:12:31 aaa kernel: cx2388x v4l2 driver version 0.0.4 loaded Mar 27 21:12:31 aaa kernel: ACPI: PCI interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 201 Mar 27 21:12:31 aaa kernel: cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected] Mar 27 21:12:31 aaa kernel: cx88[0]: hauppauge eeprom: model=34519, tuner=? (-1), radio=yes Mar 27 21:12:31 aaa wait_for_sysfs[3618]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/printer' properly (class specific file unavailable) or the sysfs-support of your device's driver needs to be fixed, please report to <linux-hotplug-devel@xxxxxxxxxxxxxxxxxxxxx> Mar 27 21:12:31 aaa kernel: cx88[0]/0: found at 0000:03:0d.0, rev: 3, irq: 201, latency: 64, mmio: 0xdd000000 Mar 27 21:12:31 aaa kernel: tuner: chip found at addr 0xc2 i2c-bus cx88[0] Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device video1 [v4l2] Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device vbi0 Mar 27 21:12:31 aaa kernel: cx88[0]/0: registered device radio0 _________________________________________________________ Do You Yahoo!? 150??MP3???????????? http://music.yisou.com/ ??????????????????? http://image.yisou.com 1G??1000??????????? http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
