On Fri, Mar 25, 2005 at 10:51:22PM +0200, Mikko Rauhala wrote: > This could be more helpful, but I managed to find out that the new > module expects a different filename. Well, I copied the firmware file to > the new names; here's the firmware directory: > > -rw-r--r-- 1 root root 286720 2005-03-25 22:13 dvb-fe-tda10045.fw > -rw-r--r-- 1 root root 30555 2005-03-25 22:13 dvb-fe-tda10045.fw.old > -rw-r--r-- 1 root root 286720 2005-03-25 22:14 dvb-fe-tda10046.fw > -rw-r--r-- 1 root root 24479 2005-03-25 22:13 dvb-fe-tda10046.fw.old > -rw-r--r-- 1 root root 286720 2004-12-17 17:42 tda1004x.bin It needs a new filename AND a different file. It is much smaller. Run the get-dvb-firmware script to fetch it instead. > You'll notice the .old files there too. Those are from my attempt to use > the firmware files extracted by the script in Documentation/dvb (they > were of course named appropriately at one point in testing). They didn't > work either. The same error message was presented in all tests. Those are the correct files to use. My dvb-fe-tda10045.fw here is 30555 bytes and it works ok. You must also have hotplug installed for firmware uploading to work. Hamish -- Hamish Moffatt VK3SB <hamish@xxxxxxxxxx> <hamish@xxxxxxxxxxxx>
