I have an Air2PC ATSC PCI card running a Fedora Core 3. Using the CVS drivers with kernel 2.6.11-5 segfaulted on the modprobe (i can post a trace if anyones interested), but on 2.6.10 it loaded ok aside from this i2c ack_error. dvbscan -cvvv works in a sense that it finds 4 programs from the PAT/PMT, and azap shows a signal lock, but cat /dev/dvb/adapter0/dvr0 > blah.ts does not produce any output. We also have a data pid on 0x2a here and I can not get data up from the dvb0_0 interface. If anyone could point me in the right direction it would be great. Thanks, Sean Mar 23 14:36:55 localhost kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully Mar 23 14:36:55 localhost kernel: flexcop-pci: card revision 2 Mar 23 14:36:55 localhost kernel: ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 3 (level, low) -> IRQ 3 Mar 23 14:36:55 localhost kernel: op = 1 Mar 23 14:36:55 localhost kernel: r100 before: 2f00f853 Mar 23 14:36:55 localhost kernel: i2c success Mar 23 14:36:55 localhost kernel: read: r100: ae00f8a7, r104: 0002d7d0 Mar 23 14:36:55 localhost kernel: r100 before: 2f00fc53 Mar 23 14:36:55 localhost kernel: i2c success Mar 23 14:36:55 localhost kernel: read: r100: ae54fca7, r104: 000f005e Mar 23 14:36:55 localhost kernel: b2c2-flexcop: MAC address = 00:d0:d7:02:54:5e Mar 23 14:36:55 localhost kernel: DVB: registering new adapter (FlexCop Digital TV device). Mar 23 14:36:55 localhost kernel: op = 0 Mar 23 14:36:55 localhost kernel: write: r100: 10340268, r104: 00000000 Mar 23 14:36:55 localhost kernel: r100 before: 11340268 Mar 23 14:36:55 localhost kernel: suffering from an i2c ack_error Mar 23 14:36:55 localhost last message repeated 29 times Mar 23 14:36:55 localhost kernel: tried 3748 times i2c operation, never finished or too many ack errors. Mar 23 14:36:55 localhost kernel: b2c2-flexcop: i2c master_xfer failed Mar 23 14:36:55 localhost kernel: op = 1 Mar 23 14:36:55 localhost kernel: r100 before: 13000068 Mar 23 14:36:55 localhost kernel: suffering from an i2c ack_error Mar 23 14:36:55 localhost last message repeated 29 times Mar 23 14:36:55 localhost kernel: tried 3746 times i2c operation, never finished or too many ack errors. Mar 23 14:36:55 localhost kernel: b2c2-flexcop: i2c master_xfer failed Mar 23 14:36:55 localhost kernel: op = 1 Mar 23 14:36:55 localhost kernel: r100 before: 13007f0f Mar 23 14:36:55 localhost kernel: suffering from an i2c ack_error Mar 23 14:36:55 localhost last message repeated 29 times Mar 23 14:36:55 localhost kernel: tried 3748 times i2c operation, never finished or too many ack errors. Mar 23 14:36:55 localhost kernel: b2c2-flexcop: i2c master_xfer failed Mar 23 14:36:55 localhost kernel: mt352_read_register: readreg error (reg=127, ret==-121) Mar 23 14:36:55 localhost kernel: op = 1 Mar 23 14:36:55 localhost kernel: r100 before: 1f00000a Mar 23 14:36:55 localhost kernel: i2c success Mar 23 14:36:55 localhost kernel: read: r100: 9e040015, r104: 00201102 Mar 23 14:36:55 localhost kernel: r100 before: 1300040a Mar 23 14:36:55 localhost kernel: i2c success Mar 23 14:36:55 localhost kernel: read: r100: 92000415, r104: 00201102 Mar 23 14:36:55 localhost kernel: b2c2-flexcop: found the nxt2002 at i2c address: 0x0a Mar 23 14:36:55 localhost kernel: DVB: registering frontend 0 (Nextwave nxt2002 VSB/QAM frontend)... Mar 23 14:36:55 localhost kernel: b2c2-flexcop: initialization of 'AirStar 2 ATSC' at the 'PCI' bus controlled by a 'FlexCopIIb' complete Mar 23 14:37:00 localhost wait_for_sysfs[8774]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/dvb' p roperly (class specific file unavailable) or the sysfs-support of your device's driver needs to be fixed, please report to <linux-ho tplug-devel@xxxxxxxxxxxxxxxxxxxxx>
