Unfortunately, still exactly the same problem
FX
Le Samedi 19 Mars 2005 02:36, Kenneth Aafl?y a ?crit?:
> On Saturday 19 March 2005 01:55, Kenneth Aafl?y wrote:
> > On Friday 18 March 2005 23:43, Fran?ois-Xavier Payet wrote:
> > > Thanks for the patch, but unfortunately, still the same problem (I'm
> > > sure the reception is good, working like a charm on windows)
> >
> > What if you delete the read of STATUS_3?
> >
> > remove this (~ line
> > state->s3 = mt352_read_register(state, STATUS_3);
> >
> > change this
> > if (-1 == state->s0 || -1 == state->s1 || -1 ==
> > state->s3) to
> > if (-1 == state->s0 || -1 == state->s1)
>
> Try enabling the commented line again (~ line 290):
> buf[3] = 0x50; // old
> // buf[3] = 0xf4; // pinnacle
>
> Try adding this:
>
> buf[0] = AGC_TARGET;
> buf[1] = 0x20;
> mt352_write(fe, buf, 2);
>
> before this (~ line 320):
>
> if (state->config->no_tuner) {
> /* start decoding */
> mt352_write(fe, fsm_go, 2);
>
> Also this should give proper signal strength readback (~ line 420):
>
> u16 signal = (mt352_read_register (state, AGC_GAIN_3) << 2) |
> ((mt352_read_register (state, AGC_GAIN_2) >> 6) & 3);
>
> At least some ideas of stuff you could try :)
>
> Kenneth
>
> _______________________________________________
>
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
