Thanks a lot, now it works. Which modules do I have to load for the Airstar2? Is a "modprobe skystar2" enough or are there any other modules to load? And is there another possibility watching DVB-T in GNOME _without_ kaxtv, it doesn't compiles at my gentoo :( thx a lot! Am Samstag, den 12.03.2005, 10:28 +0100 schrieb Sebastian Schneider: > Hello Karl, > > it seems that you forgot to include i2c into your kernel. Try to > enable this: > Device Drivers --> > --> I2C support --> > --> I2C support aktivieren (m) > --> I2C device interface aktivieren (m) > --> I2C Algorithms --> > --> I2C bit-banging interfaces aktivieren (m) > --> I2C PCF 8584 interfaces aktivieren (m) > > It might look a bit different in your kernel-config, but try it. > > Good luck, > > Sebastian Schneider > > > > > Karl Reichert wrote: > > Hi @all, > > > > I have a Technisat Airstar 2 and gentoo with kernel 2.6.11.2 > > > > I'm having problems loading the modules for my Airstar. > > > > This is my kernel-config: > > > > Device Drivers --> > > Multimedia Devices --> > > <M> Video for Linux > > [...] > > DVB Devices --> > > [*] DVB For Linux > > [M] DVB Core Support > > [...] > > [M] B2C2/Technisat Air/Sky/CableStar 2 PCI > > > > > > > > > > doing make works without any problems > > doing make modules_install throws the following: > > > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/nxt2002.ko needs unknown symbol i2c_transfer > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/stv0299.ko needs unknown symbol i2c_transfer > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/mt352.ko needs unknown symbol i2c_transfer > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/mt312.ko needs unknown symbol i2c_transfer > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/b2c2/skystar2.ko > > needs unknown symbol i2c_del_adapter > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/b2c2/skystar2.ko > > needs unknown symbol i2c_add_adapter > > WARNING: /lib/modules/2.6.11.2/kernel/drivers/media/dvb/b2c2/skystar2.ko > > needs unknown symbol i2c_transfer > > > > > > Then, after booting the new kernel doing a modprobe dvb-core works > > perfectly, but doing a modprobe skystar2 throws the following: > > > > WARNING: Error inserting mt312 > > (/lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/mt312.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > WARNING: Error inserting nxt2002 > > (/lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/nxt2002.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > WARNING: Error inserting stv0299 > > (/lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/stv0299.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > WARNING: Error inserting mt352 > > (/lib/modules/2.6.11.2/kernel/drivers/media/dvb/frontends/mt352.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > FATAL: Error inserting skystar2 > > (/lib/modules/2.6.11.2/kernel/drivers/media/dvb/b2c2/skystar2.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > > > > > > > And dmesg says this: > > > > [...] > > mt312: Unknown symbol i2c_transfer > > nxt2002: Unknown symbol i2c_transfer > > stv0299: Unknown symbol i2c_transfer > > mt352: Unknown symbol i2c_transfer > > skystar2: Unknown symbol mt352_attach > > skystar2: Unknown symbol stv0299_writereg > > skystar2: Unknown symbol i2c_del_adapter > > skystar2: Unknown symbol nxt2002_attach > > skystar2: Unknown symbol i2c_add_adapter > > skystar2: Unknown symbol i2c_transfer > > skystar2: Unknown symbol mt352_write > > skystar2: Unknown symbol stv0299_attach > > skystar2: Unknown symbol vp310_attach > > stv0299: Unknown symbol i2c_transfer > > > > > > > > > > Does anyone have an idea where the problem is? > > > > thx > > > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > >
