On Saturday 12 March 2005 01:01, Lukas Kasprowicz wrote > I tried the cvs dvb-kernel. > I got a 2.6.11-gentoo-r2 Kernel. Used makelinks with my kernel source and > compiled it. > > My Problem with the "FE_DISEQC_SEND_BURST failed: Operation not supported" > disapeared, but now i have a new problem: > > The card can not lock anymore. I get no "FE_HAS_LOCK" on any channel. scan > does not work, too. > > lspci: > 0000:00:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > 0000:00:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > > lspci -nv: > 0000:00:0c.0 Class 0400: 109e:036e (rev 11) > Subsystem: 11bd:001c > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at dddfe000 (32-bit, prefetchable) > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > 0000:00:0c.1 Class 0480: 109e:0878 (rev 11) > Subsystem: 11bd:001c > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at dddff000 (32-bit, prefetchable) > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 Your card is listed at http://www.linuxtv.org/wiki/index.php/DVB_cards_requiring_definition I'm wondering what that cards frontend is? What does it say on the tin-can? Remember a picture speaks a 1000 words.. and there is a gallery of video cards out there.. You might be required to open the tin-can, so if you can (it's not soldered), you might as well note (or take a picture) of what is in there right away. Kenneth
