Anders Gunnarsson wrote: > The best settings I've found so far is the following, try to edit these > rows in insmod.sh > > insmod ./dvb-core.o dvb_override_tune_delay=800 > insmod ./ves1820.o pwm=0x64 (add verbose=1 after pwm to see your AFC-value) > > For me tuning is reasonably fast, a few seconds and reception is very > good. Hope you solve your problem. thanks, but this did not worked... as i was not able to set pwm (got "unknown parameter"), i changed the ves1820.c: i replaced the line state->pwm = pwm with state->pwm = 0x64 i am not sure if this is the correct place to do this, but i think so!? after this, using czap changed only the "ber" value from 000062d4 to 00029220, but the status is still "00" and no FE_HAS_LOCK... i would really like to try to test if it works with my original firmware, but it seems the driver does not support loading of the original firmware!? )-: seems that i have to return to windows, if nobody has another idea )-: andi
