From: "Patrick Boettcher" <patrick.boettcher@xxxxxxx> > PID 0x10 (NIT?) provides wrong information about the transponder. > It is _not_ a problem with the cinergyT2-driver. I have e-mailed someone about this, and it appears to be fixed today. Yesterday the NIT on channel 27 (522MHz) was: NIT version 7 for actual network 12289 (0x3001): section number 0, last section number 0 Network Descriptors: network name: DVB-T Berlin/Brandenburg Transport Stream Loops: Transport Descriptors for 8468:257 service list descriptor: terrestrial delivery system: frequency = 192000000 Hz, bandwidth = 7 MHz, constellation = 16-QAM hierarchy = none, HP_code_rate = 2/3, LP_code_rate = 1/2 guard_interval = 1/8, transmission_mode = 8k, other_frequency = no Transport Descriptors for 8468:258 service list descriptor: SID = 14, type = digital television service SID = 11, type = digital television service SID = 12, type = digital television service SID = 13, type = digital television service terrestrial delivery system: frequency = 522000000 Hz, bandwidth = 8 MHz, constellation = 16-QAM hierarchy = none, HP_code_rate = 2/3, LP_code_rate = 2/3 guard_interval = 1/8, transmission_mode = 8k, other_frequency = no And today it is: NIT version 7 for actual network 12289 (0x3001) section number 0, last section number 0 Network Descriptors: network name: DVB-T Berlin/Brandenburg Transport Stream Loops: Transport Descriptors for 8468:258 service list descriptor: SID = 14, type = digital television service SID = 11, type = digital television service SID = 12, type = digital television service SID = 13, type = digital television service terrestrial delivery system: frequency = 522000000 Hz, bandwidth = 8 MHz, constellation = 16-QAM hierarchy = none, HP_code_rate = 2/3, LP_code_rate = 2/3 guard_interval = 1/8, transmission_mode = 8k, other_frequency = no Transport Descriptors for 8468:257 service list descriptor: terrestrial delivery system: frequency = 191500000 Hz, bandwidth = 7 MHz, constellation = 16-QAM hierarchy = none, HP_code_rate = 2/3, LP_code_rate = 1/2 guard_interval = 1/8, transmission_mode = 8k, other_frequency = no So please try dvbscan again today with the initial transponder list. Regards, -- Robert Schlabbach e-mail: robert_s@xxxxxxx Berlin, Germany