Hello,
when loading the dvb-modules, dmesg shows errors from ves1820:
# modprobe dvb-ttpci
# dmesg
[cut]
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
saa7146: found saa7146 @ mem e095c800 (revision 1, irq 10) (0x13c2,0x0002).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-C rev2.X).
adapter has MAC addr = 00:d0:5c:00:08:15
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 0
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
ves1820: ves1820_readreg(): readreg error (reg == 0x1a,ret == -121)
dvb-ttpci: A frontend driver was not found for device 1131/7146 subsystem 13c2/0002
dvb-ttpci: found av7110-0.
Though I have two cards (1 premium and one budget) currently
# ls -la /dev/dvb/adapter0/
only shows
total 0
drwxr-xr-x 1 root root 0 Jan 1 1970 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
crw------- 1 root root 212, 1 Jan 1 1970 audio0
crw------- 1 root root 212, 6 Jan 1 1970 ca0
crw------- 1 root root 212, 4 Jan 1 1970 demux0
crw------- 1 root root 212, 5 Jan 1 1970 dvr0
crw------- 1 root root 212, 7 Jan 1 1970 net0
crw------- 1 root root 212, 8 Jan 1 1970 osd0
crw------- 1 root root 212, 0 Jan 1 1970 video0
(Shouldn't be the device number 250 ?)
There's no adapter1
I tried several times with several kernel versions (2.4 also). Sometimes I was lucky, so there was an adapter1, but
there never was a frontend found and persistantly I find these lines in dmesg:
ves1820: ves1820_readreg(): readreg error (reg == 0x1a,ret == -121)
dvb-ttpci: A frontend driver was not found for device 1131/7146 subsystem 13c2/0002
Is there a bug in the frontend-module ?
Im thankfull for any help as I have been trying for almost 4 weeks now....
Best regards,
Armin
This is my hardware:
0000:00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at ff000800 (32-bit, non-prefetchable)
0000:00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / Hauppauge WinTV-NOVA-C DVB card
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ff000400 (32-bit, non-prefetchable)
This my kernel on a gentoo-box (DELL Optiplex GX-1 A10):
development-sources-2.6.10-r1 ; DVB is patched via CVS
I closely followed the gentoo-instructions from the vdr-wiki (http://www.vdr-wiki.de/wiki/index.php/Gentoo_VDR), I only head to take a more recent kernel-version.
DVB-part of my config:
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_FIRMWARE=y
CONFIG_DVB_AV7110_FIRMWARE_FILE="/usr/lib/hotplug/firmware/dvb-ttpci-01.fw"
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_DIBUSB is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_SKYSTAR is not set
# CONFIG_DVB_B2C2_USB is not set
#
# Supported BT878 Adapters
#
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
# CONFIG_DVB_CX24110 is not set
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_TDA80XX is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_VES1X93=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_ATMEL_AT76C651 is not set
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terresterial DTV) frontends
#
# CONFIG_DVB_NXT2002 is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_BUF=m
--end
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
