Hi, can you send me a picture and info for inclusion to http://www.bttv-gallery.de ? - picture of the card, the card backside - picture of remote control (if applicable) and of original package - list of chips - list of input connectors - printings on PCB, printings on stickers on the card - lspci -v and lspci -vn - "dmesg" when loading the modules - if feasible "eeprom" output (from bttv tools) - if feasible "*.INF" files from the Windows Driver CD - exact tuner type (eventually this is hidden under the vender sticker) - exact model name and model number from package - in which country do you live/ in which country this card was bought Even parts of this info will be very helpful! Regards, Gunther Hans Gunnarsson wrote: >I have a Twinhan dvb-t card with the ci addon card, and with Manu's patch applied to cvs from 2004-12-16, I get this result from dvbscan: > >./dvbscan dvb-t/se-Stockholm_Nacka >scanning dvb-t/se-Stockholm_Nacka >using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >initial transponder 730000000 0 2 9 3 1 2 0 >initial transponder 754000000 0 2 9 3 1 2 0 >initial transponder 778000000 0 2 9 3 1 2 0 >initial transponder 706000000 0 2 9 3 1 2 0 >initial transponder 746000000 0 2 9 3 1 2 0 > > >>>>tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 730000000:INVERSION_AUTO:BANDWIDTHe_8_MHZe:FEC_2_3:FEC_AUTO>AQAM_6e4:TRANSMISSION_MODE_8KGUARDe_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>>> >>>> >WARNING: >>> tuning failed!!! >ERROR: initial tuning failed >dumping lists (0 services) >Done. > > > >I have SuSE 9.2 with a 2.6.9 kernel. >I load the drivers with: >modprobe bttv i2c_hw=1 card=0x71 >modprobe dvb-bt8xx >modprobe dst dst_type=1 >modprobe dst_ca > > >Here is the output from dmesg: > >bttv: driver version 0.9.15 loaded >bttv: using 8 buffers with 2080k (520 pages) each for capture >bttv: Bt8xx card found (0). >ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 185 >bttv0: Bt878 (rev 17) at 0000:06:02.0, irq: 185, latency: 32, mmio: 0xdfefe000 >bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 >bttv0: using: Twinhan DST + clones [card=113,insmod option] >bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] >bttv0: using tuner=4 >bttv0: add subdevice "dvb0" >bt878: AUDIO driver version 0.0.0 loaded >bt878: Bt878 AUDIO function found (0). >ACPI: PCI interrupt 0000:06:02.1[A] -> GSI 18 (level, low) -> IRQ 185 >bt878(0): Bt878 (rev 17) at 06:02.1, irq: 185, latency: 32, memory: 0xdfeff000 >DVB: registering new adapter (bttv0). >dst_check_ci: recognize DTT-CI >DST type : terrestrial >DST type flags : 0x2 ts204 0x10 firmware version = 2 >DVB: registering frontend 0 (DST DVB-T)... > > >Any ideas? >w) -> IRQ 185 >bttv0: Bt878 (rev 17) at 0000:06:02.0, irq: 185, latency: 32, mmio: 0xdfefe000 >bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 >bttv0: using: Twinhan DST + clones [card=113,insmod option] >bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] >bttv0: using tuner=4 >bttv0: add subdevice "dvb0" >bt878: AUDIO driver version 0.0.0 loaded >bt878: Bt878 AUDIO function found (0). >ACPI: PCI interrupt 0000:06:02.1[A] -> GSI 18 (level, low) -> IRQ 185 >bt878(0): Bt878 (rev 17) at 06:02.1, irq: 185, > > >_______________________________________________ > >linux-dvb@xxxxxxxxxxx >http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > >
