Am 06.06.2017 18:30, schrieb Colin King:
> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>
> The current code checks if a status value is greater than 7 and
> sets the status string as "ERROR" and then over writes the
> string based on the bottom 3 bits of the value. Instead, fix this by
> only checking on the bottom 3 bits of the value if the value is less
> than 8.
>
> Detected by CoverityScan, CID#1416607 ("Unused value")
>
> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> ---
> .../css2400/runtime/debug/src/ia_css_debug.c | 141 +++++++++++----------
> 1 file changed, 72 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c b/drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c
> index bcc0d464084f..80d6fe29f30d 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c
> @@ -765,28 +765,29 @@ static void debug_print_if_state(input_formatter_state_t *state, const char *id)
>
> val = state->fsm_sync_status;
>
> - if (val > 7)
> + if (val > 7) {
> fsm_sync_status_str = "ERROR";
> -
> - switch (val & 0x7) {
> - case 0:
> - fsm_sync_status_str = "idle";
> - break;
> - case 1:
> - fsm_sync_status_str = "request frame";
> - break;
> - case 2:
> - fsm_sync_status_str = "request lines";
> - break;
> - case 3:
> - fsm_sync_status_str = "request vectors";
> - break;
> - case 4:
> - fsm_sync_status_str = "send acknowledge";
> - break;
> - default:
> - fsm_sync_status_str = "unknown";
> - break;
> + } else {
> + switch (val & 0x7) {
> + case 0:
> + fsm_sync_status_str = "idle";
> + break;
> + case 1:
> + fsm_sync_status_str = "request frame";
> + break;
> + case 2:
> + fsm_sync_status_str = "request lines";
> + break;
> + case 3:
> + fsm_sync_status_str = "request vectors";
> + break;
> + case 4:
> + fsm_sync_status_str = "send acknowledge";
> + break;
> + default:
> + fsm_sync_status_str = "unknown";
> + break;
> + }
> }
>
> ia_css_debug_dtrace(2, "\t\t%-32s: (0x%X: %s)\n",
> @@ -799,34 +800,35 @@ static void debug_print_if_state(input_formatter_state_t *state, const char *id)
>
> val = state->fsm_crop_status;
>
> - if (val > 7)
> + if (val > 7) {
> fsm_crop_status_str = "ERROR";
> -
> - switch (val & 0x7) {
> - case 0:
> - fsm_crop_status_str = "idle";
> - break;
> - case 1:
> - fsm_crop_status_str = "wait line";
> - break;
> - case 2:
> - fsm_crop_status_str = "crop line";
> - break;
> - case 3:
> - fsm_crop_status_str = "crop pixel";
> - break;
> - case 4:
> - fsm_crop_status_str = "pass pixel";
> - break;
> - case 5:
> - fsm_crop_status_str = "pass line";
> - break;
> - case 6:
> - fsm_crop_status_str = "lost line";
> - break;
> - default:
> - fsm_crop_status_str = "unknown";
> - break;
> + } else {
> + switch (val & 0x7) {
> + case 0:
> + fsm_crop_status_str = "idle";
> + break;
> + case 1:
> + fsm_crop_status_str = "wait line";
> + break;
> + case 2:
> + fsm_crop_status_str = "crop line";
> + break;
> + case 3:
> + fsm_crop_status_str = "crop pixel";
> + break;
> + case 4:
> + fsm_crop_status_str = "pass pixel";
> + break;
> + case 5:
> + fsm_crop_status_str = "pass line";
> + break;
> + case 6:
> + fsm_crop_status_str = "lost line";
> + break;
> + default:
> + fsm_crop_status_str = "unknown";
> + break;
> + }
why not:
case 7:
fsm_crop_status_str = "unknown";
break;
default:
fsm_crop_status_str = "ERROR";
break;
looks more straigth to me..
same below.
less execptions, less errors
re,
wh
> }
> ia_css_debug_dtrace(2, "\t\t%-32s: (0x%X: %s)\n",
> "FSM Crop Status", val, fsm_crop_status_str);
> @@ -852,28 +854,29 @@ static void debug_print_if_state(input_formatter_state_t *state, const char *id)
>
> val = state->fsm_padding_status;
>
> - if (val > 7)
> + if (val > 7) {
> fsm_padding_status_str = "ERROR";
> -
> - switch (val & 0x7) {
> - case 0:
> - fsm_padding_status_str = "idle";
> - break;
> - case 1:
> - fsm_padding_status_str = "left pad";
> - break;
> - case 2:
> - fsm_padding_status_str = "write";
> - break;
> - case 3:
> - fsm_padding_status_str = "right pad";
> - break;
> - case 4:
> - fsm_padding_status_str = "send end of line";
> - break;
> - default:
> - fsm_padding_status_str = "unknown";
> - break;
> + } else {
> + switch (val & 0x7) {
> + case 0:
> + fsm_padding_status_str = "idle";
> + break;
> + case 1:
> + fsm_padding_status_str = "left pad";
> + break;
> + case 2:
> + fsm_padding_status_str = "write";
> + break;
> + case 3:
> + fsm_padding_status_str = "right pad";
> + break;
> + case 4:
> + fsm_padding_status_str = "send end of line";
> + break;
> + default:
> + fsm_padding_status_str = "unknown";
> + break;
> + }
> }
>
> ia_css_debug_dtrace(2, "\t\t%-32s: (0x%X: %s)\n", "FSM Padding Status",
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
