Fixed block comment alignment, Style fix only
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@xxxxxxxxx>
---
drivers/staging/ccree/ssi_aead.c | 45 ++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/ccree/ssi_aead.c b/drivers/staging/ccree/ssi_aead.c
index 26afa8794668..ecf9ff2ae336 100644
--- a/drivers/staging/ccree/ssi_aead.c
+++ b/drivers/staging/ccree/ssi_aead.c
@@ -250,7 +250,8 @@ static void ssi_aead_complete(struct device *dev, void *ssi_req, void __iomem *c
"(auth-size=%d, cipher=%d).\n",
ctx->authsize, ctx->cipher_mode);
/* In case of payload authentication failure, MUST NOT
- revealed the decrypted message --> zero its memory. */
+ * revealed the decrypted message --> zero its memory.
+ */
ssi_buffer_mgr_zero_sgl(areq->dst, areq_ctx->cryptlen);
err = -EBADMSG;
}
@@ -279,7 +280,8 @@ static int xcbc_setkey(struct cc_hw_desc *desc, struct ssi_aead_ctx *ctx)
/* Load the AES key */
HW_DESC_INIT(&desc[0]);
/* We are using for the source/user key the same buffer as for the output keys,
- because after this key loading it is not needed anymore */
+ * because after this key loading it is not needed anymore
+ */
HW_DESC_SET_DIN_TYPE(&desc[0], DMA_DLLI, ctx->auth_state.xcbc.xcbc_keys_dma_addr, ctx->auth_keylen, NS_BIT);
HW_DESC_SET_CIPHER_MODE(&desc[0], DRV_CIPHER_ECB);
HW_DESC_SET_CIPHER_CONFIG0(&desc[0], DRV_CRYPTO_DIRECTION_ENCRYPT);
@@ -420,8 +422,9 @@ static int validate_keys_sizes(struct ssi_aead_ctx *ctx)
return 0; /* All tests of keys sizes passed */
}
-/*This function prepers the user key so it can pass to the hmac processing
- (copy to intenral buffer or hash in case of key longer than block */
+/* This function prepers the user key so it can pass to the hmac processing
+ * (copy to intenral buffer or hash in case of key longer than block
+ */
static int
ssi_get_plain_hmac_key(struct crypto_aead *tfm, const u8 *key, unsigned int keylen)
{
@@ -600,7 +603,8 @@ ssi_aead_setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen)
(AES_MIN_KEY_SIZE + CTR_RFC3686_NONCE_SIZE))
goto badkey;
/* Copy nonce from last 4 bytes in CTR key to
- * first 4 bytes in CTR IV */
+ * first 4 bytes in CTR IV
+ */
memcpy(ctx->ctr_nonce, key + ctx->auth_keylen + ctx->enc_keylen -
CTR_RFC3686_NONCE_SIZE, CTR_RFC3686_NONCE_SIZE);
/* Set CTR key size */
@@ -829,7 +833,8 @@ ssi_aead_process_authenc_data_desc(
{
/* DOUBLE-PASS flow (as default)
* assoc. + iv + data -compact in one table
- * if assoclen is ZERO only IV perform */
+ * if assoclen is ZERO only IV perform
+ */
ssi_sram_addr_t mlli_addr = areq_ctx->assoc.sram_addr;
u32 mlli_nents = areq_ctx->assoc.mlli_nents;
@@ -1287,7 +1292,8 @@ static inline void ssi_aead_hmac_authenc(
/**
* Double-pass flow
* Fallback for unsupported single-pass modes,
- * i.e. using assoc. data of non-word-multiple */
+ * i.e. using assoc. data of non-word-multiple
+ */
if (direct == DRV_CRYPTO_DIRECTION_ENCRYPT) {
/* encrypt first.. */
ssi_aead_process_cipher(req, desc, seq_size, data_flow_mode);
@@ -1305,7 +1311,8 @@ static inline void ssi_aead_hmac_authenc(
/* decrypt after.. */
ssi_aead_process_cipher(req, desc, seq_size, data_flow_mode);
/* read the digest result with setting the completion bit
- must be after the cipher operation */
+ * must be after the cipher operation
+ */
ssi_aead_process_digest_result_desc(req, desc, seq_size);
}
}
@@ -1338,7 +1345,8 @@ ssi_aead_xcbc_authenc(
/**
* Double-pass flow
* Fallback for unsupported single-pass modes,
- * i.e. using assoc. data of non-word-multiple */
+ * i.e. using assoc. data of non-word-multiple
+ */
if (direct == DRV_CRYPTO_DIRECTION_ENCRYPT) {
/* encrypt first.. */
ssi_aead_process_cipher(req, desc, seq_size, data_flow_mode);
@@ -1353,7 +1361,8 @@ ssi_aead_xcbc_authenc(
/* decrypt after..*/
ssi_aead_process_cipher(req, desc, seq_size, data_flow_mode);
/* read the digest result with setting the completion bit
- must be after the cipher operation */
+ * must be after the cipher operation
+ */
ssi_aead_process_digest_result_desc(req, desc, seq_size);
}
}
@@ -1712,8 +1721,10 @@ static inline void ssi_aead_gcm_setup_ghash_desc(
idx++;
/* Configure Hash Engine to work with GHASH.
- Since it was not possible to extend HASH submodes to add GHASH,
- The following command is necessary in order to select GHASH (according to HW designers)*/
+ * Since it was not possible to extend HASH submodes to add GHASH,
+ * The following command is necessary in order to
+ * select GHASH (according to HW designers)
+ */
HW_DESC_INIT(&desc[idx]);
HW_DESC_SET_DIN_NO_DMA(&desc[idx], 0, 0xfffff0);
HW_DESC_SET_DOUT_NO_DMA(&desc[idx], 0, 0, 1);
@@ -2044,7 +2055,8 @@ static int ssi_aead_process(struct aead_request *req, enum drv_crypto_direction
if (ctx->cipher_mode == DRV_CIPHER_CTR) {
/* Build CTR IV - Copy nonce from last 4 bytes in
- * CTR key to first 4 bytes in CTR IV */
+ * CTR key to first 4 bytes in CTR IV
+ */
memcpy(areq_ctx->ctr_iv, ctx->ctr_nonce, CTR_RFC3686_NONCE_SIZE);
if (areq_ctx->backup_giv == NULL) /*User none-generated IV*/
memcpy(areq_ctx->ctr_iv + CTR_RFC3686_NONCE_SIZE,
@@ -2106,9 +2118,10 @@ static int ssi_aead_process(struct aead_request *req, enum drv_crypto_direction
ssi_req.ivgen_dma_addr_len = 1;
} else if (ctx->cipher_mode == DRV_CIPHER_CCM) {
/* In ccm, the IV needs to exist both inside B0 and inside the counter.
- It is also copied to iv_dma_addr for other reasons (like returning
- it to the user).
- So, using 3 (identical) IV outputs. */
+ * It is also copied to iv_dma_addr for other reasons (like returning
+ * it to the user).
+ * So, using 3 (identical) IV outputs.
+ */
ssi_req.ivgen_dma_addr[0] = areq_ctx->gen_ctx.iv_dma_addr + CCM_BLOCK_IV_OFFSET;
ssi_req.ivgen_dma_addr[1] = sg_dma_address(&areq_ctx->ccm_adata_sg) + CCM_B0_OFFSET + CCM_BLOCK_IV_OFFSET;
ssi_req.ivgen_dma_addr[2] = sg_dma_address(&areq_ctx->ccm_adata_sg) + CCM_CTR_COUNT_0_OFFSET + CCM_BLOCK_IV_OFFSET;
--
2.12.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
