[PATCH] staging: rtl8192u: Improve readability and fix sparse warnings: cast from restricted __le16

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes following sparse warnings:

drivers/staging/rtl8192u//r8192U_dm.c:2307:49: warning: cast from restricted __le16
drivers/staging/rtl8192u//r8192U_dm.c:2308:44: warning: cast from restricted __le16
drivers/staging/rtl8192u//r8192U_dm.c:2309:44: warning: cast from restricted __le16

In order to avoid the warnings the u4bAcParam variable is constructed
using the cpu's endianness and in case of big endian architectures the
variable is converted back to little endian before passed to write_nic_dword
function.

Also the patch improves readability by getting rid of unnecessary scope
and splitting complex variable construction to multiple lines.

Signed-off-by: Tuomo Rinne <tuomo.rinne@xxxxxxxxx>
---
 drivers/staging/rtl8192u/r8192U_dm.c | 77 ++++++++++++++++++++----------------
 1 file changed, 42 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 9209aad..c63974a 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -2189,7 +2189,7 @@ static	void dm_cs_ratio(
 	struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	static u8				initialized, force_write;
+	static u8			initialized, force_write;
 	static u32			reset_cnt;
 
 	if (dm_digtable.dig_algorithm_switch) {
@@ -2295,43 +2295,50 @@ static void dm_check_edca_turbo(
 		 * Restore original EDCA according to the declaration of AP.
 		 */
 		if (priv->bcurrent_turbo_EDCA) {
+			u8	    u1bAIFS;
+			u32	    u4bAcParam, op_limit, cw_max, cw_min;
+
+			struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
+			u8 mode = priv->ieee80211->mode;
+
+			/*  For Each time updating EDCA parameter, reset EDCA turbo mode status. */
+			dm_init_edca_turbo(dev);
+			u1bAIFS = qos_parameters->aifs[0] * ((mode & (IEEE_G | IEEE_N_24G)) ? 9 : 20) + aSifsTime;
+
+			op_limit = (u32)le16_to_cpu(qos_parameters->tx_op_limit[0]);
+			cw_max   = (u32)le16_to_cpu(qos_parameters->cw_max[0]);
+			cw_min   = (u32)le16_to_cpu(qos_parameters->cw_min[0]);
+
+			op_limit <<= AC_PARAM_TXOP_LIMIT_OFFSET;
+			cw_max   <<= AC_PARAM_ECW_MAX_OFFSET;
+			cw_min   <<= AC_PARAM_ECW_MIN_OFFSET;
+			u1bAIFS  <<= AC_PARAM_AIFS_OFFSET;
+
+			u4bAcParam = op_limit | cw_max | cw_min | u1bAIFS;
+
+			cpu_to_le32s(u4bAcParam);
+			write_nic_dword(dev, EDCAPARA_BE, u4bAcParam);
+
+			/*
+			 * Check ACM bit.
+			 * If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
+			 */
 			{
-				u8		u1bAIFS;
-				u32		u4bAcParam;
-				struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
-				u8 mode = priv->ieee80211->mode;
-
-				/*  For Each time updating EDCA parameter, reset EDCA turbo mode status. */
-				dm_init_edca_turbo(dev);
-				u1bAIFS = qos_parameters->aifs[0] * ((mode&(IEEE_G|IEEE_N_24G)) ? 9 : 20) + aSifsTime;
-				u4bAcParam = (((u32)(qos_parameters->tx_op_limit[0])) << AC_PARAM_TXOP_LIMIT_OFFSET)|
-					(((u32)(qos_parameters->cw_max[0])) << AC_PARAM_ECW_MAX_OFFSET)|
-					(((u32)(qos_parameters->cw_min[0])) << AC_PARAM_ECW_MIN_OFFSET)|
-					((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET);
-				/*write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);*/
-				write_nic_dword(dev, EDCAPARA_BE,  u4bAcParam);
-
-				/*
-				 * Check ACM bit.
-				 * If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
-				 */
-				{
-					/*  TODO:  Modified this part and try to set acm control in only 1 IO processing!! */
-
-					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
-					u8		AcmCtrl;
-
-					read_nic_byte(dev, AcmHwCtrl, &AcmCtrl);
-
-					if (pAciAifsn->f.ACM) { /*  ACM bit is 1. */
-						AcmCtrl |= AcmHw_BeqEn;
-					} else {	/* ACM bit is 0. */
-						AcmCtrl &= (~AcmHw_BeqEn);
-					}
+				/*  TODO:  Modified this part and try to set acm control in only 1 IO processing!! */
 
-					RT_TRACE(COMP_QOS, "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
-					write_nic_byte(dev, AcmHwCtrl, AcmCtrl);
+				PACI_AIFSN	pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
+				u8		AcmCtrl;
+
+				read_nic_byte(dev, AcmHwCtrl, &AcmCtrl);
+
+				if (pAciAifsn->f.ACM) { /*  ACM bit is 1. */
+					AcmCtrl |= AcmHw_BeqEn;
+				} else {	/* ACM bit is 0. */
+					AcmCtrl &= (~AcmHw_BeqEn);
 				}
+
+				RT_TRACE(COMP_QOS, "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
+				write_nic_byte(dev, AcmHwCtrl, AcmCtrl);
 			}
 			priv->bcurrent_turbo_EDCA = false;
 		}
-- 
2.1.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux