Function uses identifier 'retval' to hold the error return value. The
rest of the driver uses 'ret' for this purpose. Being uniform in the
choice of identifiers generally adds to the cleanliness of the code,
also it is arguably easier to follow the code if one name is used for
one task.
Rename identifier 'retval' to 'ret'.
Signed-off-by: Tobin C. Harding <me@xxxxxxxx>
---
drivers/staging/ks7010/ks7010_sdio.c | 62 ++++++++++++++++--------------------
1 file changed, 28 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/ks7010/ks7010_sdio.c b/drivers/staging/ks7010/ks7010_sdio.c
index 467c0c4..0185d3d 100644
--- a/drivers/staging/ks7010/ks7010_sdio.c
+++ b/drivers/staging/ks7010/ks7010_sdio.c
@@ -172,7 +172,7 @@ void ks_wlan_hw_wakeup_request(struct ks_wlan_private *priv)
static int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
{
unsigned char rw_data;
- int retval;
+ int ret;
if (priv->reg.powermgt == POWMGT_ACTIVE_MODE)
return 0;
@@ -196,9 +196,9 @@ static int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
if (!atomic_read(&priv->psstatus.confirm_wait) &&
!atomic_read(&priv->psstatus.snooze_guard) &&
!cnt_txqbody(priv)) {
- retval = ks7010_sdio_read(priv, INT_PENDING, &rw_data,
- sizeof(rw_data));
- if (retval) {
+ ret = ks7010_sdio_read(priv, INT_PENDING, &rw_data,
+ sizeof(rw_data));
+ if (ret) {
DPRINTK(1, " error : INT_PENDING=%02X\n", rw_data);
queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
&priv->ks_wlan_hw.rw_wq, 1);
@@ -206,9 +206,9 @@ static int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
}
if (!rw_data) {
rw_data = GCR_B_DOZE;
- retval = ks7010_sdio_write(priv, GCR_B, &rw_data,
- sizeof(rw_data));
- if (retval) {
+ ret = ks7010_sdio_write(priv, GCR_B, &rw_data,
+ sizeof(rw_data));
+ if (ret) {
DPRINTK(1, " error : GCR_B=%02X\n", rw_data);
queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
&priv->ks_wlan_hw.rw_wq, 1);
@@ -385,7 +385,7 @@ static void rx_event_task(unsigned long dev)
static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
{
- int retval;
+ int ret;
struct rx_device_buffer *rx_buffer;
struct hostif_hdr *hdr;
unsigned char read_status;
@@ -401,10 +401,9 @@ static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
}
rx_buffer = &priv->rx_dev.rx_dev_buff[priv->rx_dev.qtail];
- retval =
- ks7010_sdio_read(priv, DATA_WINDOW, &rx_buffer->data[0],
- hif_align_size(size));
- if (retval)
+ ret = ks7010_sdio_read(priv, DATA_WINDOW, &rx_buffer->data[0],
+ hif_align_size(size));
+ if (ret)
return;
/* length check */
@@ -417,10 +416,9 @@ static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
#endif
/* rx_status update */
read_status = READ_STATUS_IDLE;
- retval =
- ks7010_sdio_write(priv, READ_STATUS, &read_status,
- sizeof(read_status));
- if (retval)
+ ret = ks7010_sdio_write(priv, READ_STATUS, &read_status,
+ sizeof(read_status));
+ if (ret)
DPRINTK(1, " error : READ_STATUS=%02X\n", read_status);
/* length check fail */
@@ -434,10 +432,9 @@ static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
/* read status update */
read_status = READ_STATUS_IDLE;
- retval =
- ks7010_sdio_write(priv, READ_STATUS, &read_status,
- sizeof(read_status));
- if (retval)
+ ret = ks7010_sdio_write(priv, READ_STATUS, &read_status,
+ sizeof(read_status));
+ if (ret)
DPRINTK(1, " error : READ_STATUS=%02X\n", read_status);
DPRINTK(4, "READ_STATUS=%02X\n", read_status);
@@ -529,7 +526,7 @@ static void ks7010_rw_function(struct work_struct *work)
static void ks_sdio_interrupt(struct sdio_func *func)
{
- int retval;
+ int ret;
struct ks_sdio_card *card;
struct ks_wlan_private *priv;
unsigned char status, rsize, rw_data;
@@ -539,11 +536,10 @@ static void ks_sdio_interrupt(struct sdio_func *func)
DPRINTK(4, "\n");
if (priv->dev_state >= DEVICE_STATE_BOOT) {
- retval =
- ks7010_sdio_read(priv, INT_PENDING, &status,
- sizeof(status));
- if (retval) {
- DPRINTK(1, "read INT_PENDING Failed!!(%d)\n", retval);
+ ret = ks7010_sdio_read(priv, INT_PENDING, &status,
+ sizeof(status));
+ if (ret) {
+ DPRINTK(1, "read INT_PENDING Failed!!(%d)\n", ret);
goto queue_delayed_work;
}
DPRINTK(4, "INT_PENDING=%02X\n", rw_data);
@@ -555,10 +551,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
/* bit2 -> Read Status Busy */
if (status & INT_GCR_B ||
atomic_read(&priv->psstatus.status) == PS_SNOOZE) {
- retval =
- ks7010_sdio_read(priv, GCR_B, &rw_data,
- sizeof(rw_data));
- if (retval) {
+ ret = ks7010_sdio_read(priv, GCR_B, &rw_data,
+ sizeof(rw_data));
+ if (ret) {
DPRINTK(1, " error : GCR_B=%02X\n", rw_data);
goto queue_delayed_work;
}
@@ -576,10 +571,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
do {
/* read (WriteStatus/ReadDataSize FN1:00_0014) */
- retval =
- ks7010_sdio_read(priv, WSTATUS_RSIZE, &rw_data,
- sizeof(rw_data));
- if (retval) {
+ ret = ks7010_sdio_read(priv, WSTATUS_RSIZE, &rw_data,
+ sizeof(rw_data));
+ if (ret) {
DPRINTK(1, " error : WSTATUS_RSIZE=%02X\n",
rw_data);
goto queue_delayed_work;
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
