[PATCH v6 37/39] media: imx-csi: add frame size/interval enumeration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>

Add frame size and frame interval enumeration to CSI.

CSI can downscale the image independently horizontally and vertically by a
factor of two, which enumerates to four different frame sizes at the
output pads. The input pad supports a range of frame sizes.

CSI can also drop frames, resulting in frame rate reduction, so
enumerate the resulting possible output frame rates.

Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
 drivers/staging/media/imx/imx-media-csi.c | 62 +++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 19609a7..b11e80f 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1123,6 +1123,66 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int csi_enum_frame_size(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_pad_config *cfg,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fse->pad >= CSI_NUM_PADS ||
+	    fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	if (fse->pad == CSI_SINK_PAD) {
+		fse->min_width = MIN_W;
+		fse->max_width = MAX_W;
+		fse->min_height = MIN_H;
+		fse->max_height = MAX_H;
+	} else {
+		crop = __csi_get_crop(priv, cfg, fse->which);
+
+		fse->min_width = fse->max_width = fse->index & 1 ?
+			crop->width / 2 : crop->width;
+		fse->min_height = fse->max_height = fse->index & 2 ?
+			crop->height / 2 : crop->height;
+	}
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int csi_enum_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct csi_priv *priv = v4l2_get_subdevdata(sd);
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	if (fie->pad >= CSI_NUM_PADS ||
+	    fie->index >= (fie->pad == CSI_SINK_PAD ? 1 : ARRAY_SIZE(csi_skip)))
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+
+	crop = __csi_get_crop(priv, cfg, fie->which);
+
+	if ((fie->width == crop->width || fie->width == crop->width / 2) &&
+	    (fie->height == crop->height || fie->height == crop->height / 2)) {
+		fie->interval = priv->frame_interval;
+		csi_apply_skip_interval(&csi_skip[fie->index], &fie->interval);
+	} else {
+		ret = -EINVAL;
+	}
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
 static int csi_get_fmt(struct v4l2_subdev *sd,
 		       struct v4l2_subdev_pad_config *cfg,
 		       struct v4l2_subdev_format *sdformat)
@@ -1587,6 +1647,8 @@ static struct v4l2_subdev_video_ops csi_video_ops = {
 
 static struct v4l2_subdev_pad_ops csi_pad_ops = {
 	.enum_mbus_code = csi_enum_mbus_code,
+	.enum_frame_size = csi_enum_frame_size,
+	.enum_frame_interval = csi_enum_frame_interval,
 	.get_fmt = csi_get_fmt,
 	.set_fmt = csi_set_fmt,
 	.get_selection = csi_get_selection,
-- 
2.7.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux