On Mon, Mar 20, 2017 at 01:36:21AM +0530, simran singhal wrote:
Hi Simran,
I going to ask for a v7 without looking at the code ;)
Subject line needs subsystem and driver.
Subject and log message can be improved.
> The IIO subsystem is redefining iio_dev->mlock to be used by
> the IIO core only for protecting device operating mode changes.
> ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
>
> In this driver, mlock was being used to protect hardware state
> changes. Replace it with buf_lock in the devices global data.
^^^^^^^^^^^ this was not done
>
> As buf_lock protects both the adis16060_spi_write() and
> adis16060_spi_read() functions and both are always called in
> pair. First write, then read. Thus, refactor the code to have
> one single function adis16060_spi_write_than_read() which is
> protected by the existing buf_lock.
This was done. So, you were able to obsolete the need for mlock
by creating the paired function.
>
> Removed nested locks as the function adis16060_read_raw call
> a lock on &st->buf_lock and then calls the function
> adis16060_spi_write which again tries to get hold
> of the same lock.
^^^^ this was not done. Yes, you avoided nested locks through
proper coding, but we don't want to give the impression in the
log message that there was a pre-existing nested lock issue.
I did checkpatch & compile it...but looked no further yet.
alisons
>
> Signed-off-by: simran singhal <singhalsimran0@xxxxxxxxx>
> ---
>
> v6:
> -Change commit message
> -Remove nested lock
>
> drivers/staging/iio/gyro/adis16060_core.c | 40 ++++++++++---------------------
> 1 file changed, 13 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
> index c9d46e7..1c6de46 100644
> --- a/drivers/staging/iio/gyro/adis16060_core.c
> +++ b/drivers/staging/iio/gyro/adis16060_core.c
> @@ -40,25 +40,17 @@ struct adis16060_state {
>
> static struct iio_dev *adis16060_iio_dev;
>
> -static int adis16060_spi_write(struct iio_dev *indio_dev, u8 val)
> +static int adis16060_spi_write_than_read(struct iio_dev *indio_dev,
> + u8 conf, u16 *val)
> {
> int ret;
> struct adis16060_state *st = iio_priv(indio_dev);
>
> - mutex_lock(&st->buf_lock);
> - st->buf[2] = val; /* The last 8 bits clocked in are latched */
> + st->buf[2] = conf; /* The last 8 bits clocked in are latched */
> ret = spi_write(st->us_w, st->buf, 3);
> - mutex_unlock(&st->buf_lock);
> -
> - return ret;
> -}
> -
> -static int adis16060_spi_read(struct iio_dev *indio_dev, u16 *val)
> -{
> - int ret;
> - struct adis16060_state *st = iio_priv(indio_dev);
>
> - mutex_lock(&st->buf_lock);
> + if (ret < 0)
> + return ret;
>
> ret = spi_read(st->us_r, st->buf, 3);
>
> @@ -69,8 +61,8 @@ static int adis16060_spi_read(struct iio_dev *indio_dev, u16 *val)
> */
> if (!ret)
> *val = ((st->buf[0] & 0x3) << 12) |
> - (st->buf[1] << 4) |
> - ((st->buf[2] >> 4) & 0xF);
> + (st->buf[1] << 4) |
> + ((st->buf[2] >> 4) & 0xF);
> mutex_unlock(&st->buf_lock);
>
> return ret;
> @@ -83,20 +75,18 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> {
> u16 tval = 0;
> int ret;
> + struct adis16060_state *st = iio_priv(indio_dev);
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> /* Take the iio_dev status lock */
> - mutex_lock(&indio_dev->mlock);
> - ret = adis16060_spi_write(indio_dev, chan->address);
> + mutex_lock(&st->buf_lock);
> + ret = adis16060_spi_write_than_read(indio_dev,
> + chan->address, &tval);
> + mutex_unlock(&st->buf_lock);
> if (ret < 0)
> - goto out_unlock;
> + return ret;
>
> - ret = adis16060_spi_read(indio_dev, &tval);
> - if (ret < 0)
> - goto out_unlock;
> -
> - mutex_unlock(&indio_dev->mlock);
> *val = tval;
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_OFFSET:
> @@ -110,10 +100,6 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> }
>
> return -EINVAL;
> -
> -out_unlock:
> - mutex_unlock(&indio_dev->mlock);
> - return ret;
> }
>
> static const struct iio_info adis16060_info = {
> --
> 2.7.4
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@xxxxxxxxxxxxxxxx.
> To post to this group, send email to outreachy-kernel@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170319200621.GA21295%40singhal-Inspiron-5558.
> For more options, visit https://groups.google.com/d/optout.
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
