Em Mon, 20 Mar 2017 04:08:21 -0700 Michael Zoran <mzoran@xxxxxxxxxxxx> escreveu: > On Mon, 2017-03-20 at 07:58 -0300, Mauro Carvalho Chehab wrote: > > Em Sun, 19 Mar 2017 22:11:07 -0300 > > Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> escreveu: > > > > > Em Sun, 19 Mar 2017 10:04:28 -0700 > > > Michael Zoran <mzoran@xxxxxxxxxxxx> escreveu: > > > > > > > A working DT that I tried this morning with the current firmware > > > > is > > > > posted here: > > > > http://lists.infradead.org/pipermail/linux-rpi-kernel/2017-March/ > > > > 005924 > > > > .html > > > > > > > > It even works with minecraft_pi! > > > > With the new firmware, sometime after booting, I'm getting an oops, > > caused > > by bcm2835_audio/vchiq: > > > > [ 298.788995] Unable to handle kernel NULL pointer dereference at > > virtual address 00000034 > > [ 298.821458] pgd = ed004000 > > [ 298.832294] [00000034] *pgd=2e5e9835, *pte=00000000, > > *ppte=00000000 > > [ 298.857450] Internal error: Oops: 17 [#1] SMP ARM > > [ 298.876273] Modules linked in: cfg80211 hid_logitech_hidpp > > hid_logitech_dj snd_bcm2835(C) snd_pcm snd_timer snd soundcore > > vchiq(C) uio_pdrv_genirq uio fuse > > [ 298.932064] CPU: 3 PID: 847 Comm: pulseaudio Tainted: > > G C 4.11.0-rc1+ #56 > > [ 298.963774] Hardware name: Generic DT based system > > [ 298.982945] task: ef758580 task.stack: ee4c6000 > > [ 299.001080] PC is at mutex_lock+0x14/0x3c > > [ 299.017148] LR is at vchiq_add_service_internal+0x138/0x3a0 > > [vchiq] > > [ 299.042246] pc : [<c0c849d4>] lr : [<bf059654>] psr: > > 40000013 > > sp : ee4c7ca8 ip : 00000000 fp : ef709800 > > [ 299.088240] r10: 00000000 r9 : ee3bffc0 r8 : 00000034 > > [ 299.109153] r7 : 00000003 r6 : 00000000 r5 : ee4c7d00 r4 : > > ee1d8c00 > > [ 299.135291] r3 : ef758580 r2 : 00000000 r1 : ffffffc8 r0 : > > 00000034 > > [ 299.161431] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA > > ARM Segment none > > [ 299.190008] Control: 10c5383d Table: 2d00406a DAC: 00000051 > > [ 299.213011] Process pulseaudio (pid: 847, stack limit = > > 0xee4c6220) > > [ 299.238104] Stack: (0xee4c7ca8 to 0xee4c8000) > > [ 299.255539] 7ca0: c1403d54 80400040 ff7f0600 > > ff7f0660 bf06b578 ee3bffc0 > > [ 299.288301] 7cc0: 00000000 ee3afd00 00000000 ee4c7d00 00000000 > > bf0640b4 00000000 bf066428 > > [ 299.321064] 7ce0: ee3afd00 ee3afd00 ee4c7d34 ee3af444 ee3bffc0 > > ee3af444 ee3bffc0 bf0662ec > > [ 299.353826] 7d00: 41554453 bf065db0 ee3afd00 00010002 bf0d7408 > > ee3af440 00000000 bf0d7408 > > [ 299.386587] 7d20: ee79bd80 bf0d5a04 00000000 ef709800 00000020 > > 00000002 00000001 41554453 > > [ 299.419349] 7d40: 00000000 00000000 00000000 bf0d559c ee3af440 > > 00000001 00000001 00000000 > > [ 299.452111] 7d60: ee24ac80 ee24ac80 ee1c4a00 00000000 ee79bd80 > > ee24ace8 00000001 bf0d4dfc > > [ 299.484872] 7d80: 0000000b ffffffff ee4b8c3c 00000000 ee4c7dc8 > > ee4b8800 ee4b8c28 ee4c6000 > > [ 299.517635] 7da0: 00000000 ee4b8c3c ed029e40 bf0c0404 ee4b8800 > > ee1c4a00 ee4b8800 ed029e40 > > [ 299.550398] 7dc0: 00000000 bf0c0560 ee072340 00000000 ef758580 > > c0367b7c ee4b8c40 ee4b8c40 > > [ 299.583161] 7de0: 00000000 ee4b8800 ed029e40 ee318f80 ed029e40 > > 00000006 ee318f80 bf0c0748 > > [ 299.615924] 7e00: bf0a3430 ee4f6180 00000000 c0428fe0 ee318f80 > > 000021b0 00000026 ed029e40 > > [ 299.648697] 7e20: ee318f80 ed029e48 c0428f1c ee4c7e94 00000006 > > c0421cc0 ee4c7ed0 00000000 > > [ 299.681464] 7e40: 00000802 00000000 ee4c7e94 00000006 ee318f80 > > c0432c8c ee4c7f40 c0433bc0 > > [ 299.714225] 7e60: 00000000 ed029e40 00000000 00000041 00000000 > > ed004000 00000000 ee4c6000 > > [ 299.746987] 7e80: eec69808 00000005 00000000 00000002 ee318f80 > > ef0d2910 ee924908 bf0ba284 > > [ 299.779750] 7ea0: ee31bbc0 bebb53c4 ee4e1d00 00000011 ee4c7f74 > > 00000001 fffff000 c0308b04 > > [ 299.812512] 7ec0: ee4c6000 00000000 bebb5710 c0434578 ef0d2910 > > ee924908 73541c18 00000008 > > [ 299.845274] 7ee0: ee4a7019 00000000 00000000 ee899bb0 ee318f80 > > 00000101 00000002 00000084 > > [ 299.878037] 7f00: 00000000 00000000 00000000 ee4c7f10 ee318df8 > > ed029840 40045532 bebb53c4 > > [ 299.910799] 7f20: ee4c6000 ee4a7000 c1403ef8 bebb550c 00000011 > > ee5eca00 00000020 ee5eca18 > > [ 299.943562] 7f40: ee4a7000 00000000 00080802 00000002 ffffff9c > > fffff000 00000011 ffffff9c > > [ 299.976324] 7f60: ee4a7000 c0422e70 00000002 c04359b0 ed029840 > > 00000802 ed020000 00000006 > > [ 300.009086] 7f80: 00000100 00000001 00000000 ffffffff 00000004 > > b189d000 00000005 c0308b04 > > [ 300.041848] 7fa0: ee4c6000 c0308940 ffffffff 00000004 bebb550c > > 00080802 bebb53c4 00084b58 > > [ 300.074611] 7fc0: ffffffff 00000004 b189d000 00000005 00000000 > > bebb550c 00099448 bebb5710 > > [ 300.107373] 7fe0: 00000000 bebb53c8 b6c40da4 b6c24334 80000010 > > bebb550c 2fffd861 2fffdc61 > > [ 300.140190] [<c0c849d4>] (mutex_lock) from [<bf059654>] > > (vchiq_add_service_internal+0x138/0x3a0 [vchiq]) > > [ 300.178237] [<bf059654>] (vchiq_add_service_internal [vchiq]) from > > [<bf0640b4>] (vchiq_open_service+0x58/0xf0 [vchiq]) > > [ 300.221152] [<bf0640b4>] (vchiq_open_service [vchiq]) from > > [<bf0662ec>] (vchi_service_open+0x74/0xa8 [vchiq]) > > [ 300.260919] [<bf0662ec>] (vchi_service_open [vchiq]) from > > [<bf0d5a04>] (bcm2835_audio_open+0xe8/0x2d0 [snd_bcm2835]) > > [ 300.303111] [<bf0d5a04>] (bcm2835_audio_open [snd_bcm2835]) from > > [<bf0d4dfc>] (snd_bcm2835_playback_open_generic+0xc0/0x1c4 > > [snd_bcm2835]) > > [ 300.352975] [<bf0d4dfc>] (snd_bcm2835_playback_open_generic > > [snd_bcm2835]) from [<bf0c0404>] (snd_pcm_open_substream+0x60/0x110 > > [snd_pcm]) > > [ 300.402848] [<bf0c0404>] (snd_pcm_open_substream [snd_pcm]) from > > [<bf0c0560>] (snd_pcm_open+0xac/0x1fc [snd_pcm]) > > [ 300.444009] [<bf0c0560>] (snd_pcm_open [snd_pcm]) from > > [<bf0c0748>] (snd_pcm_playback_open+0x3c/0x5c [snd_pcm]) > > [ 300.484459] [<bf0c0748>] (snd_pcm_playback_open [snd_pcm]) from > > [<c0428fe0>] (chrdev_open+0xc4/0x180) > > [ 300.521408] [<c0428fe0>] (chrdev_open) from [<c0421cc0>] > > (do_dentry_open.constprop.3+0x1fc/0x304) > > [ 300.556964] [<c0421cc0>] (do_dentry_open.constprop.3) from > > [<c0432c8c>] (path_openat+0x588/0x1078) > > [ 300.592866] [<c0432c8c>] (path_openat) from [<c0434578>] > > (do_filp_open+0x60/0xc4) > > [ 300.622846] [<c0434578>] (do_filp_open) from [<c0422e70>] > > (do_sys_open+0x110/0x1c0) > > [ 300.653524] [<c0422e70>] (do_sys_open) from [<c0308940>] > > (ret_fast_syscall+0x0/0x3c) > > > > > Hi, can you e-mail out your config.txt? Do you have audio enabled in > config.txt? yes, I have this: $ cat config.txt |grep -i audio # uncomment to force a HDMI mode rather than DVI. This can make audio work in # Enable audio (loads snd_bcm2835) dtparam=audio=on Full config attached. Thanks, Mauro --- # Latest RPi Kernel #kernel=rpi-4.10.y/vmlinuz-4.11.0-rc2-v8+ #device_tree=rpi-4.10.y/bcm2837-rpi-3-b.dtb # Upstream Kernel kernel=upstream/vmlinuz-4.11.0-rc1+ device_tree=upstream/bcm2837-rpi-3-b.dtb # For more options and information see # http://rpf.io/configtxtreadme # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable the lirc-rpi module #dtoverlay=lirc-rpi # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on # NOOBS Auto-generated Settings: hdmi_force_hotplug=1 start_x=1 gpu_mem=128 enable_uart=1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
