On 02/16/2017 03:37 AM, Russell King - ARM Linux wrote:
Two problems.
On Wed, Feb 15, 2017 at 06:19:02PM -0800, Steve Longerbeam wrote:
media: imx: propagate sink pad formats to source pads
1) It looks like all cases aren't being caught:
- entity 74: ipu1_csi0 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev13
pad0: Sink
[fmt:SRGGB8/816x616 field:none]
<- "ipu1_csi0_mux":2 [ENABLED]
pad1: Source
[fmt:AYUV32/816x616 field:none
crop.bounds:(0,0)/816x616
crop:(0,0)/816x616]
-> "ipu1_ic_prp":0 []
-> "ipu1_vdic":0 []
pad2: Source
[fmt:SRGGB8/816x616 field:none
crop.bounds:(0,0)/816x616
crop:(0,0)/816x616]
-> "ipu1_csi0 capture":0 [ENABLED]
While the size has been propagated to pad1, the format has not.
Right, Philipp also caught this. I need to finish propagating all
params from sink to source pads (mbus code and field, and colorimetry
eventually).
2) /dev/video* device node assignment
I've no idea at the moment how the correct /dev/video* node should be
chosen - initially with Philipp and your previous code, it was
/dev/video3 after initial boot. Philipp's was consistently /dev/video3.
Yours changed to /dev/video7 when removing and re-inserting the modules
(having fixed that locally.) This version makes CSI0 be /dev/video7,
but after a remove+reinsert, it becomes (eg) /dev/video8.
/dev/v4l/by-path/platform-capture-subsystem-video-index4 also is not a
stable path - the digit changes (it's supposed to be a stable path.)
After a remove+reinsert, it becomes (eg)
/dev/v4l/by-path/platform-capture-subsystem-video-index5.
/dev/v4l/by-id doesn't contain a symlink for this either.
What this means is that it's very hard to script the setup, because
there's no easy way to know what device is the capture device. While
it may be possible to do:
media-ctl -d /dev/media1 -p | \
grep -A2 ': ipu1_csi0 capture' | \
sed -n 's|.*\(/dev/video[0-9]*\).*|\1|p'
that's hardly a nice solution - while it fixes the setup script, it
doesn't stop the pain of having to delve around to find the correct
device to use for gstreamer to test with.
I'll try to nail down the main capture node numbers, even after module
reload.
Steve
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
