Add __csi_get_fmt() and use it to return the correct mbus format
(active or try) in get_fmt. Use it in other places as well.
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
Suggested-by: Russell King <linux@xxxxxxxxxxxxxxx>
---
drivers/staging/media/imx/imx-media-csi.c | 52 ++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 63555dc..b0aac82 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -788,7 +788,20 @@ static int csi_eof_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
return 0;
}
-static int csi_try_crop(struct csi_priv *priv, struct v4l2_rect *crop,
+static struct v4l2_mbus_framefmt *
+__csi_get_fmt(struct csi_priv *priv, struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&priv->sd, cfg, pad);
+ else
+ return &priv->format_mbus[pad];
+}
+
+static int csi_try_crop(struct csi_priv *priv,
+ struct v4l2_rect *crop,
+ struct v4l2_subdev_pad_config *cfg,
+ enum v4l2_subdev_format_whence which,
struct imx_media_subdev *sensor)
{
struct v4l2_of_endpoint *sensor_ep;
@@ -796,7 +809,7 @@ static int csi_try_crop(struct csi_priv *priv, struct v4l2_rect *crop,
v4l2_std_id std;
int ret;
- infmt = &priv->format_mbus[CSI_SINK_PAD];
+ infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, which);
sensor_ep = &sensor->sensor_ep;
crop->width = min_t(__u32, infmt->width, crop->width);
@@ -852,11 +865,16 @@ static int csi_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_format *sdformat)
{
struct csi_priv *priv = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *fmt;
if (sdformat->pad >= CSI_NUM_PADS)
return -EINVAL;
- sdformat->format = priv->format_mbus[sdformat->pad];
+ fmt = __csi_get_fmt(priv, cfg, sdformat->pad, sdformat->which);
+ if (!fmt)
+ return -EINVAL;
+
+ sdformat->format = *fmt;
return 0;
}
@@ -880,8 +898,6 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
if (priv->stream_on)
return -EBUSY;
- infmt = &priv->format_mbus[CSI_SINK_PAD];
-
sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
if (IS_ERR(sensor)) {
v4l2_err(&priv->sd, "no sensor attached\n");
@@ -895,6 +911,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
switch (sdformat->pad) {
case CSI_SRC_PAD_DIRECT:
case CSI_SRC_PAD_IDMAC:
+ infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, sdformat->which);
+
if (sdformat->format.width < priv->crop.width * 3 / 4)
sdformat->format.width = priv->crop.width / 2;
else
@@ -957,7 +975,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
crop.top = 0;
crop.width = sdformat->format.width;
crop.height = sdformat->format.height;
- ret = csi_try_crop(priv, &crop, sensor);
+ ret = csi_try_crop(priv, &crop, cfg,
+ sdformat->which, sensor);
if (ret)
return ret;
@@ -1004,7 +1023,9 @@ static int csi_get_selection(struct v4l2_subdev *sd,
if (sel->pad >= CSI_NUM_PADS || sel->pad == CSI_SINK_PAD)
return -EINVAL;
- infmt = &priv->format_mbus[CSI_SINK_PAD];
+ infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, sel->which);
+ if (!infmt)
+ return -EINVAL;
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
@@ -1014,7 +1035,14 @@ static int csi_get_selection(struct v4l2_subdev *sd,
sel->r.height = infmt->height;
break;
case V4L2_SEL_TGT_CROP:
- sel->r = priv->crop;
+ if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_rect *try_crop =
+ v4l2_subdev_get_try_crop(&priv->sd,
+ cfg, sel->pad);
+ sel->r = *try_crop;
+ } else {
+ sel->r = priv->crop;
+ }
break;
default:
return -EINVAL;
@@ -1028,7 +1056,6 @@ static int csi_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_selection *sel)
{
struct csi_priv *priv = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *outfmt;
struct imx_media_subdev *sensor;
int ret;
@@ -1058,15 +1085,16 @@ static int csi_set_selection(struct v4l2_subdev *sd,
return 0;
}
- outfmt = &priv->format_mbus[sel->pad];
-
- ret = csi_try_crop(priv, &sel->r, sensor);
+ ret = csi_try_crop(priv, &sel->r, cfg, sel->which, sensor);
if (ret)
return ret;
if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
cfg->try_crop = sel->r;
} else {
+ struct v4l2_mbus_framefmt *outfmt =
+ &priv->format_mbus[sel->pad];
+
priv->crop = sel->r;
/* Update the source format */
outfmt->width = sel->r.width;
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
