On Fri, Jan 06, 2017 at 06:11:39PM -0800, Steve Longerbeam wrote:
> +static int imxcsi2_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *sdformat)
> +{
> + struct imxcsi2_dev *csi2 = sd_to_dev(sd);
> +
> + sdformat->format = csi2->format_mbus;
> +
> + return 0;
> +}
Hi Steve,
This isn't correct, and I suspect the other get_fmt implementations are
the same - I've just checked imx-csi.c, and that also appears to have
the same issue.
When get_fmt() is called with sdformat->which == V4L2_SUBDEV_FORMAT_TRY,
you need to return the try format rather than the current format. See
the second paragraph of Documentation/media/uapi/v4l/dev-subdev.rst's
"Format Negotiation" section, where it talks about using
V4L2_SUBDEV_FORMAT_TRY with both VIDIOC_SUBDEV_G_FMT and
VIDIOC_SUBDEV_S_FMT.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
