This is derived from the downstream tree's build system, but with just a single Kconfig option. For now the driver only builds on 32-bit arm -- the aarch64 build breaks due to the driver using arm-specific cache flushing functions. Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> --- drivers/staging/media/Kconfig | 2 ++ drivers/staging/media/Makefile | 1 + drivers/staging/media/platform/bcm2835/Kconfig | 10 ++++++++++ drivers/staging/media/platform/bcm2835/Makefile | 11 +++++++++++ 4 files changed, 24 insertions(+) create mode 100644 drivers/staging/media/platform/bcm2835/Kconfig create mode 100644 drivers/staging/media/platform/bcm2835/Makefile diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index ffb8fa72c3da..abd0e2d57c20 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -27,6 +27,8 @@ source "drivers/staging/media/davinci_vpfe/Kconfig" source "drivers/staging/media/omap4iss/Kconfig" +source "drivers/staging/media/platform/bcm2835/Kconfig" + source "drivers/staging/media/s5p-cec/Kconfig" # Keep LIRC at the end, as it has sub-menus diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index a28e82cf6447..dc89325c463d 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ +obj-$(CONFIG_VIDEO_BCM2835) += platform/bcm2835/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/platform/bcm2835/Kconfig b/drivers/staging/media/platform/bcm2835/Kconfig new file mode 100644 index 000000000000..7c5245dc3225 --- /dev/null +++ b/drivers/staging/media/platform/bcm2835/Kconfig @@ -0,0 +1,10 @@ +config VIDEO_BCM2835 + tristate "Broadcom BCM2835 camera driver" + depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) + depends on BCM2835_VCHIQ + depends on ARM + select VIDEOBUF2_VMALLOC + help + Say Y here to enable camera host interface devices for + Broadcom BCM2835 SoC. This operates over the VCHIQ interface + to a service running on VideoCore. diff --git a/drivers/staging/media/platform/bcm2835/Makefile b/drivers/staging/media/platform/bcm2835/Makefile new file mode 100644 index 000000000000..d7900a5951a8 --- /dev/null +++ b/drivers/staging/media/platform/bcm2835/Makefile @@ -0,0 +1,11 @@ +bcm2835-v4l2-$(CONFIG_VIDEO_BCM2835) := \ + bcm2835-camera.o \ + controls.o \ + mmal-vchiq.o + +obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-v4l2.o + +ccflags-y += \ + -Idrivers/staging/vc04_services \ + -Idrivers/staging/vc04_services/interface/vcos/linuxkernel \ + -D__VCCOREVER__=0x04000000 -- 2.11.0 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
