On 01/04/2017 05:33 AM, Vladimir Zapolskiy wrote:
Hi Steve,
On 01/03/2017 10:57 PM, Steve Longerbeam wrote:
Add the core media driver for i.MX SOC.
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
Documentation/devicetree/bindings/media/imx.txt | 205 +++++
v2 was sent before getting Rob's review comments, but still they
should be addressed in v3.
yes, those changes will be part of v3 as well.
Also I would suggest to separate device tree binding documentation
change and place it as the first patch in the series, this should
make the following DTS changes valid.
done.
Documentation/media/v4l-drivers/imx.rst | 430 ++++++++++
drivers/staging/media/Kconfig | 2 +
drivers/staging/media/Makefile | 1 +
drivers/staging/media/imx/Kconfig | 8 +
drivers/staging/media/imx/Makefile | 6 +
drivers/staging/media/imx/TODO | 18 +
drivers/staging/media/imx/imx-media-common.c | 985 ++++++++++++++++++++++
drivers/staging/media/imx/imx-media-dev.c | 479 +++++++++++
drivers/staging/media/imx/imx-media-fim.c | 509 +++++++++++
drivers/staging/media/imx/imx-media-internal-sd.c | 457 ++++++++++
drivers/staging/media/imx/imx-media-of.c | 291 +++++++
drivers/staging/media/imx/imx-media-of.h | 25 +
drivers/staging/media/imx/imx-media.h | 299 +++++++
include/media/imx.h | 15 +
include/uapi/Kbuild | 1 +
include/uapi/linux/v4l2-controls.h | 4 +
include/uapi/media/Kbuild | 2 +
include/uapi/media/imx.h | 30 +
Probably Greg should ack the UAPI changes, you may consider
to split them into a separate patch.
I split out the one-line addition to include/uapi/Kbuild with an empty
include/uapi/media/Kbuild into a new patch "UAPI: Add media UAPI Kbuild
file".
Also added a patch "media: Add userspace header file for i.MX".
+
+struct imx_media_subdev *
+imx_media_find_subdev_by_sd(struct imx_media_dev *imxmd,
+ struct v4l2_subdev *sd)
+{
+ struct imx_media_subdev *imxsd;
+ int i, ret = -ENODEV;
+
+ for (i = 0; i < imxmd->num_subdevs; i++) {
+ imxsd = &imxmd->subdev[i];
+ if (sd == imxsd->sd) {
This can be simplifed:
...
if (sd == imxsd->sd)
return imxsd;
}
return ERR_PTR(-ENODEV);
yep, done.
+struct imx_media_subdev *
+imx_media_find_subdev_by_id(struct imx_media_dev *imxmd, u32 grp_id)
+{
+ struct imx_media_subdev *imxsd;
+ int i, ret = -ENODEV;
+
+ for (i = 0; i < imxmd->num_subdevs; i++) {
+ imxsd = &imxmd->subdev[i];
+ if (imxsd->sd && imxsd->sd->grp_id == grp_id) {
+ ret = 0;
+ break;
This can be simplifed:
...
if (imxsd->sd && imxsd->sd->grp_id == grp_i)
return imxsd;
}
return ERR_PTR(-ENODEV);
done.
diff --git a/drivers/staging/media/imx/imx-media-dev.c b/drivers/staging/media/imx/imx-media-dev.c
new file mode 100644
index 0000000..8d22730
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-dev.c
@@ -0,0 +1,479 @@
+/*
+ * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/of_platform.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mc.h>
Please sort out the list of headers alphabetically.
done.
+#include <video/imx-ipu-v3.h>
+#include <media/imx.h>
+#include "imx-media.h"
+#include "imx-media-of.h"
+
+#define DEVICE_NAME "imx-media"
I suppose you don't need this macro.
sure why not, removed.
[snip]
+ */
+static int imx_media_create_links(struct imx_media_dev *imxmd)
+{
+ struct imx_media_subdev *local_sd;
+ struct imx_media_subdev *remote_sd;
+ struct v4l2_subdev *source, *sink;
+ struct imx_media_link *link;
+ struct imx_media_pad *pad;
+ u16 source_pad, sink_pad;
+ int num_pads, i, j, k;
+ int ret = 0;
+
+ for (i = 0; i < imxmd->num_subdevs; i++) {
+ local_sd = &imxmd->subdev[i];
+ num_pads = local_sd->num_sink_pads + local_sd->num_src_pads;
+
+ for (j = 0; j < num_pads; j++) {
+ pad = &local_sd->pad[j];
+
+ for (k = 0; k < pad->num_links; k++) {
+ link = &pad->link[k];
+
<snip>
Indentation depth is quite terrific.
yes, it needs to iterate by subdev, pads in the subdev, then links
in the pad. But I moved the code under the innermost loop into a
function imx_media_create_link(), which creates a single media
link. So it's not so much an eye-sore now.
+static struct platform_driver imx_media_pdrv = {
+ .probe = imx_media_probe,
+ .remove = imx_media_remove,
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
Setting of .owner is not needed nowadays IIRC.
a quick look at struct device_driver definition didn't mention that
.owner member is deprecated or not needed, so for now I'll leave
it in place. We can revisit that later.
+ .of_match_table = imx_media_dt_ids,
+ },
+};
+
+module_platform_driver(imx_media_pdrv);
+
+MODULE_DESCRIPTION("i.MX5/6 v4l2 media controller driver");
+MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/imx/imx-media-fim.c b/drivers/staging/media/imx/imx-media-fim.c
new file mode 100644
index 0000000..52bfa8d
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-fim.c
@@ -0,0 +1,509 @@
+/*
+ * Frame Interval Monitor.
+ *
+ * Copyright (c) 2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#ifdef CONFIG_IMX_GPT_ICAP
+#include <linux/mxc_icap.h>
+#endif
This looks clumsy. Include it unconditionally, if needed
do #ifdef's inside the header file.
The i.MX input capture patch will come later. These are just
placeholders until then, the config name could even change.
For now I just removed the above conditional include.
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-ctrls.h>
Please sort out the list alphabetically.
done.
+ if (IS_ENABLED(CONFIG_IMX_GPT_ICAP)) {
+ ret = of_property_read_u32_array(fim_np,
+ "input-capture-channel",
+ icap, 2);
+ if (!ret) {
+ fim->icap_channel = icap[0];
+ fim->icap_flags = icap[1];
+ }
Should you return error otherwise?
nope, it's an optional property.
diff --git a/drivers/staging/media/imx/imx-media-of.c b/drivers/staging/media/imx/imx-media-of.c
new file mode 100644
index 0000000..018d05a
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-of.c
@@ -0,0 +1,291 @@
+/*
+ * Media driver for Freescale i.MX5/6 SOC
+ *
+ * Open Firmware parsing.
+ *
+ * Copyright (c) 2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/of_platform.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-ctrls.h>
Please sort out the list alphabetically.
done.
+static int of_get_port_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ /* if this node is itself a port, return 1 */
+ if (of_node_cmp(np->name, "port") == 0)
+ return 1;
+
+ for_each_child_of_node(np, child) {
+ if (of_node_cmp(child->name, "port") == 0)
+ num++;
+ }
Unneeded bracers.
fixed.
+static struct imx_media_subdev *
+of_parse_subdev(struct imx_media_dev *imxmd, struct device_node *sd_np,
+ bool is_csi_port)
+{
+ struct imx_media_subdev *imxsd;
+ int i, num_pads, ret;
+
+ if (!of_device_is_available(sd_np)) {
+ dev_dbg(imxmd->dev, "%s: %s not enabled\n", __func__,
+ sd_np->name);
+ return NULL;
+ }
+
+ /* register this subdev with async notifier */
+ imxsd = imx_media_add_async_subdev(imxmd, sd_np, NULL);
+ if (!imxsd)
+ return NULL;
+ if (IS_ERR(imxsd))
+ return imxsd;
if (IS_ERR_OR_NULL(imxsd))
return imxsd;
yep, done.
+
+ if (imxsd->num_sink_pads == 0) {
+ /* this might be a sensor */
+ of_parse_sensor(imxmd, imxsd, sd_np);
+ }
Unneeded bracers.
ok removed.
+
+ for (i = 0; i < num_pads; i++) {
+ struct device_node *epnode = NULL, *port, *remote_np;
+ struct imx_media_subdev *remote_imxsd;
+ struct imx_media_pad *pad;
+ int remote_pad;
Too deep indentation, may be move the cycle body into a separate function?
in this case I prefer not to, of_parse_subdev() is called recursively, and I
think it's bad form to hide that fact by moving the recursive call into a
separate function. The indentation is not that deep, only two loops deep.
+
+ /* init this pad */
+ pad = &imxsd->pad[i];
+ pad->pad.flags = (i < imxsd->num_sink_pads) ?
+ MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE;
+
+ if (is_csi_port)
+ port = (i < imxsd->num_sink_pads) ? sd_np : NULL;
+ else
+ port = of_graph_get_port_by_id(sd_np, i);
+ if (!port)
+ continue;
+
+ while ((epnode = of_get_next_child(port, epnode))) {
Please reuse for_each_child_of_node() here.
done.
+ of_get_remote_pad(epnode, &remote_np, &remote_pad);
+ if (!remote_np) {
+ of_node_put(epnode);
Please remove of_node_put() here, of_get_next_child() does it.
oops, good catch, fixed.
+ continue;
+ }
+
+ ret = of_add_pad_link(imxmd, pad, sd_np, remote_np,
+ i, remote_pad);
+ if (ret) {
+ imxsd = ERR_PTR(ret);
+ break;
+ }
+
+ if (i < imxsd->num_sink_pads) {
+ /* follow sink endpoints upstream */
+ remote_imxsd = of_parse_subdev(imxmd,
+ remote_np,
+ false);
+ if (IS_ERR(remote_imxsd)) {
+ imxsd = remote_imxsd;
+ break;
+ }
+ }
+
+ of_node_put(remote_np);
+ of_node_put(epnode);
also removed this put of epnode.
+
+int imx_media_of_parse(struct imx_media_dev *imxmd,
+ struct imx_media_subdev *(*csi)[4],
+ struct device_node *np)
+{
+ struct device_node *csi_np;
+ struct imx_media_subdev *lcsi;
Please swap two lines above to get the reverse christmas tree ordering.
done.
+ u32 ipu_id, csi_id;
+ int i, ret;
+
+ for (i = 0; ; i++) {
+ csi_np = of_parse_phandle(np, "ports", i);
+ if (!csi_np)
+ break;
+
+ lcsi = of_parse_subdev(imxmd, csi_np, true);
+ if (IS_ERR(lcsi)) {
+ ret = PTR_ERR(lcsi);
+ goto err_put;
+ }
+
+ of_property_read_u32(csi_np, "reg", &csi_id);
Not sure if it is safe enough to ignore return value and potentially
left csi_id uninitialized.
The CSI nodes are port nodes, and the reg property is required,
so I added a check and error return here.
+ ipu_id = of_alias_get_id(csi_np->parent, "ipu");
+
+ if (ipu_id > 1 || csi_id > 1) {
+ dev_err(imxmd->dev, "%s: invalid ipu/csi id (%u/%u)\n",
+ __func__, ipu_id, csi_id);
+ ret = -EINVAL;
+ goto err_put;
+ }
+
+ of_node_put(csi_np);
You can put the node right after of_alias_get_id() call, then in case
of error return right from the if block and remove the goto label.
done.
+
+ (*csi)[ipu_id * 2 + csi_id] = lcsi;
+ }
+
+ return 0;
+err_put:
+ of_node_put(csi_np);
+ return ret;
+}
diff --git a/drivers/staging/media/imx/imx-media-of.h b/drivers/staging/media/imx/imx-media-of.h
new file mode 100644
index 0000000..0c61b05
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media-of.h
@@ -0,0 +1,25 @@
+/*
+ * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC
+ *
+ * Open Firmware parsing.
+ *
+ * Copyright (c) 2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _IMX_MEDIA_OF_H
+#define _IMX_MEDIA_OF_H
+
I do believe you should include some headers or add declarations
of "struct imx_media_dev", "struct imx_media_subdev", "struct device_node".
actually imx-media-of.h isn't really needed, I just moved those prototypes
into imx-media.h and removed imx-media-of.h.
diff --git a/drivers/staging/media/imx/imx-media.h b/drivers/staging/media/imx/imx-media.h
new file mode 100644
index 0000000..6a018a9
--- /dev/null
+++ b/drivers/staging/media/imx/imx-media.h
@@ -0,0 +1,299 @@
+/*
+ * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC
+ *
+ * Copyright (c) 2016 Mentor Graphics Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _IMX_MEDIA_H
+#define _IMX_MEDIA_H
Please insert here an empty line to improve readability.
done.
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
Please sort out the list alphabetically.
done.
Steve
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
