[PATCH 05/18] Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>

As part of the effort to separate out architecture specific code,
consolidate all Hyper-V specific clocksource code to an architecture
specific code.

Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
---
 arch/x86/hyperv/hv_init.c       |  104 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/mshyperv.h |   12 +++++
 arch/x86/kernel/cpu/mshyperv.c  |   23 ---------
 drivers/hv/hv.c                 |   95 -----------------------------------
 drivers/hv/hyperv_vmbus.h       |    8 ---
 5 files changed, 116 insertions(+), 126 deletions(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index b5c8e04..940a970 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -24,6 +24,79 @@
 #include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
+#include <linux/clockchips.h>
+
+
+#ifdef CONFIG_X86_64
+
+static struct ms_hyperv_tsc_page *tsc_pg;
+
+static cycle_t read_hv_clock_tsc(struct clocksource *arg)
+{
+	cycle_t current_tick;
+
+	if (tsc_pg->tsc_sequence != 0) {
+		/*
+		 * Use the tsc page to compute the value.
+		 */
+
+		while (1) {
+			cycle_t tmp;
+			u32 sequence = tsc_pg->tsc_sequence;
+			u64 cur_tsc;
+			u64 scale = tsc_pg->tsc_scale;
+			s64 offset = tsc_pg->tsc_offset;
+
+			rdtscll(cur_tsc);
+			/* current_tick = ((cur_tsc *scale) >> 64) + offset */
+			asm("mulq %3"
+				: "=d" (current_tick), "=a" (tmp)
+				: "a" (cur_tsc), "r" (scale));
+
+			current_tick += offset;
+			if (tsc_pg->tsc_sequence == sequence)
+				return current_tick;
+
+			if (tsc_pg->tsc_sequence != 0)
+				continue;
+			/*
+			 * Fallback using MSR method.
+			 */
+			break;
+		}
+	}
+	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+	return current_tick;
+}
+
+static struct clocksource hyperv_cs_tsc = {
+		.name		= "hyperv_clocksource_tsc_page",
+		.rating		= 400,
+		.read		= read_hv_clock_tsc,
+		.mask		= CLOCKSOURCE_MASK(64),
+		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+#endif
+
+static cycle_t read_hv_clock_msr(struct clocksource *arg)
+{
+	cycle_t current_tick;
+	/*
+	 * Read the partition counter to get the current tick count. This count
+	 * is set to 0 when the partition is created and is incremented in
+	 * 100 nanosecond units.
+	 */
+	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+	return current_tick;
+}
+
+static struct clocksource hyperv_cs_msr = {
+	.name		= "hyperv_clocksource_msr",
+	.rating		= 400,
+	.read		= read_hv_clock_msr,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
 
 static void *hypercall_pg;
 /*
@@ -31,6 +104,7 @@
  * hypervisor has been detected.
  *
  * 1. Setup the hypercall page.
+ * 2. Register Hyper-V specific clocksource.
  */
 void hyperv_init(void)
 {
@@ -58,6 +132,36 @@ void hyperv_init(void)
 	hypercall_msr.enable = 1;
 	hypercall_msr.guest_physical_address = vmalloc_to_pfn(hypercall_pg);
 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
+
+	/*
+	 * Register Hyper-V specific clocksource.
+	 */
+#ifdef CONFIG_X86_64
+	if (ms_hyperv.features & HV_X64_MSR_REFERENCE_TSC_AVAILABLE) {
+		union hv_x64_msr_hypercall_contents tsc_msr;
+
+		tsc_pg = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
+		if (!tsc_pg)
+			clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+			return;
+
+		rdmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
+
+		tsc_msr.enable = 1;
+		tsc_msr.guest_physical_address = vmalloc_to_pfn(tsc_pg);
+
+		wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
+		clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
+		return;
+	}
+#endif
+	/*
+	 * For 32 bit guests just use the MSR based mechanism for reading
+	 * the partition counter.
+	 */
+
+	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
+		clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
 }
 
 /*
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index ed8e073..adfe8cc 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -26,6 +26,18 @@ struct ms_hyperv_info {
 };
 
 /*
+ * TSC page layout.
+ */
+
+struct ms_hyperv_tsc_page {
+	volatile u32 tsc_sequence;
+	u32 reserved1;
+	volatile u64 tsc_scale;
+	volatile s64 tsc_offset;
+	u64 reserved2[509];
+};
+
+/*
  * The guest OS needs to register the guest ID with the hypervisor.
  * The guest ID is a 64 bit entity and the structure of this ID is
  * specified in the Hyper-V specification:
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 8b376f8..6afb517 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -133,26 +133,6 @@ static uint32_t  __init ms_hyperv_platform(void)
 	return 0;
 }
 
-static cycle_t read_hv_clock(struct clocksource *arg)
-{
-	cycle_t current_tick;
-	/*
-	 * Read the partition counter to get the current tick count. This count
-	 * is set to 0 when the partition is created and is incremented in
-	 * 100 nanosecond units.
-	 */
-	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs = {
-	.name		= "hyperv_clocksource",
-	.rating		= 400, /* use this when running on Hyperv*/
-	.read		= read_hv_clock,
-	.mask		= CLOCKSOURCE_MASK(64),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 static unsigned char hv_get_nmi_reason(void)
 {
 	return 0;
@@ -185,9 +165,6 @@ static void __init ms_hyperv_init_platform(void)
 	}
 #endif
 
-	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
-		clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
-
 #ifdef CONFIG_X86_IO_APIC
 	no_timer_check = 1;
 #endif
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 11388d3..607d477 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -87,56 +87,6 @@ static int query_hypervisor_info(void)
 	return max_leaf;
 }
 
-#ifdef CONFIG_X86_64
-static cycle_t read_hv_clock_tsc(struct clocksource *arg)
-{
-	cycle_t current_tick;
-	struct ms_hyperv_tsc_page *tsc_pg = hv_context.tsc_page;
-
-	if (tsc_pg->tsc_sequence != 0) {
-		/*
-		 * Use the tsc page to compute the value.
-		 */
-
-		while (1) {
-			cycle_t tmp;
-			u32 sequence = tsc_pg->tsc_sequence;
-			u64 cur_tsc;
-			u64 scale = tsc_pg->tsc_scale;
-			s64 offset = tsc_pg->tsc_offset;
-
-			rdtscll(cur_tsc);
-			/* current_tick = ((cur_tsc *scale) >> 64) + offset */
-			asm("mulq %3"
-				: "=d" (current_tick), "=a" (tmp)
-				: "a" (cur_tsc), "r" (scale));
-
-			current_tick += offset;
-			if (tsc_pg->tsc_sequence == sequence)
-				return current_tick;
-
-			if (tsc_pg->tsc_sequence != 0)
-				continue;
-			/*
-			 * Fallback using MSR method.
-			 */
-			break;
-		}
-	}
-	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs_tsc = {
-		.name           = "hyperv_clocksource_tsc_page",
-		.rating         = 425,
-		.read           = read_hv_clock_tsc,
-		.mask           = CLOCKSOURCE_MASK(64),
-		.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-#endif
-
-
 /*
  * hv_init - Main initialization routine.
  *
@@ -171,29 +121,7 @@ int hv_init(void)
 	if (!hypercall_msr.enable)
 		return -ENOTSUPP;
 
-#ifdef CONFIG_X86_64
-	if (ms_hyperv.features & HV_X64_MSR_REFERENCE_TSC_AVAILABLE) {
-		union hv_x64_msr_hypercall_contents tsc_msr;
-		void *va_tsc;
-
-		va_tsc = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
-		if (!va_tsc)
-			goto cleanup;
-		hv_context.tsc_page = va_tsc;
-
-		rdmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-
-		tsc_msr.enable = 1;
-		tsc_msr.guest_physical_address = vmalloc_to_pfn(va_tsc);
-
-		wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-		clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
-	}
-#endif
 	return 0;
-
-cleanup:
-	return -ENOTSUPP;
 }
 
 /*
@@ -204,29 +132,6 @@ int hv_init(void)
 void hv_cleanup(bool crash)
 {
 
-#ifdef CONFIG_X86_64
-	union hv_x64_msr_hypercall_contents hypercall_msr;
-	/*
-	 * Cleanup the TSC page based CS.
-	 */
-	if (ms_hyperv.features & HV_X64_MSR_REFERENCE_TSC_AVAILABLE) {
-		/*
-		 * Crash can happen in an interrupt context and unregistering
-		 * a clocksource is impossible and redundant in this case.
-		 */
-		if (!oops_in_progress) {
-			clocksource_change_rating(&hyperv_cs_tsc, 10);
-			clocksource_unregister(&hyperv_cs_tsc);
-		}
-
-		hypercall_msr.as_uint64 = 0;
-		wrmsrl(HV_X64_MSR_REFERENCE_TSC, hypercall_msr.as_uint64);
-		if (!crash) {
-			vfree(hv_context.tsc_page);
-			hv_context.tsc_page = NULL;
-		}
-	}
-#endif
 }
 
 /*
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 0948526..947455d 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -416,14 +416,6 @@ struct hv_context {
 
 extern struct hv_context hv_context;
 
-struct ms_hyperv_tsc_page {
-	volatile u32 tsc_sequence;
-	u32 reserved1;
-	volatile u64 tsc_scale;
-	volatile s64 tsc_offset;
-	u64 reserved2[509];
-};
-
 struct hv_ring_buffer_debug_info {
 	u32 current_interrupt_mask;
 	u32 current_read_index;
-- 
1.7.4.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux