This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
V2 - eliminate some files that should not have been sent, and remove the
module name from the format. It is already specified by a pr_fmt().
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 16 ++++++----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 8 +++-----
6 files changed, 22 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
index f9a2c8b..89bba11 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
@@ -97,8 +97,7 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -121,8 +120,8 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("switch case %#x not processed\n",
+ boxnum);
break;
}
@@ -194,8 +192,8 @@ static void _rtl8723be_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("switch case %#x not processed\n",
+ cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index 0ae5562..2fb39f6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -747,9 +747,8 @@ static bool _rtl8723be_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1383,7 +1382,7 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
}
rtstatus = _rtl8723be_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1532,8 +1531,7 @@ static int _rtl8723be_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
}
@@ -2247,7 +2245,7 @@ void rtl8723be_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl8723be_read_adapter_info(hw, false);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl8723be_hal_customized_behavior(hw);
}
@@ -2584,9 +2582,7 @@ void rtl8723be_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
index 497913e..193125b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c
@@ -57,8 +57,8 @@ void rtl8723be_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,8 @@ void rtl8723be_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
index 0ee11cb..36acd1e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
@@ -467,7 +467,7 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
_rtl8723be_phy_init_tx_power_by_rate(hw);
@@ -478,13 +478,13 @@ static bool _rtl8723be_phy_bb8723b_config_parafile(struct ieee80211_hw *hw)
}
phy_txpower_by_rate_config(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl8723be_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -1249,8 +1249,7 @@ void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -1291,8 +1290,8 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
@@ -1316,8 +1314,8 @@ void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl8723be_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1462,8 +1459,8 @@ static bool _rtl8723be_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n",
+ *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
index 78f4f18..4849145 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c
@@ -51,8 +51,7 @@ void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index 847644d..dd42c1a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -179,8 +179,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("Can't alloc buffer for fw.\n");
return 1;
}
@@ -190,8 +189,7 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
return 0;
@@ -273,7 +271,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.fwctrl_lps = true,
.msi_support = false,
.disable_watchdog = false,
- .debug = DBG_EMERG,
+ .debug = 0,
.ant_sel = 0,
};
--
2.10.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
