This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
.../net/wireless/realtek/rtlwifi/rtl8192se/fw.c | 46 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 40 +++++++------------
.../net/wireless/realtek/rtlwifi/rtl8192se/led.c | 6 +--
.../net/wireless/realtek/rtlwifi/rtl8192se/phy.c | 36 ++++++-----------
.../net/wireless/realtek/rtlwifi/rtl8192se/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192se/sw.c | 8 ++--
6 files changed, 51 insertions(+), 88 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 32f9207..1922e78 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -113,8 +113,7 @@ static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
case RF_2T2R:
return 0x22;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown RF type(%x)\n",
- rtlphy->rf_type);
+ pr_err("Unknown RF type(%x)\n", rtlphy->rf_type);
break;
}
return 0x22;
@@ -168,9 +167,7 @@ static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
_rtl92s_fw_set_rqpn(hw);
if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Size over FIRMWARE_CODE_SIZE!\n");
-
+ pr_err("Size over FIRMWARE_CODE_SIZE!\n");
return false;
}
@@ -239,9 +236,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
break;
@@ -257,17 +253,15 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
- cpustatus);
+ pr_err("FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
+ cpustatus);
goto status_check_fail;
}
/* Turn On CPU */
rtstatus = _rtl92s_firmware_enable_cpu(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Enable CPU fail!\n");
+ pr_err("Enable CPU fail!\n");
goto status_check_fail;
}
break;
@@ -282,9 +276,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
} while (pollingcnt--);
if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling DMEM code done fail ! cpustatus(%#x)\n",
- cpustatus);
+ pr_err("Polling DMEM code done fail ! cpustatus(%#x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -308,9 +301,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
(pollingcnt <= 0)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling Load Firmware ready fail ! cpustatus(%x)\n",
- cpustatus);
+ pr_err("Polling Load Firmware ready fail ! cpustatus(%x)\n",
+ cpustatus);
goto status_check_fail;
}
@@ -331,8 +323,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
break;
default:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Unknown status check!\n");
+ pr_err("Unknown status check!\n");
rtstatus = false;
break;
}
@@ -380,8 +371,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 2. Retrieve IMEM image. */
if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
sizeof(firmware->fw_imem))) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than IMEM required\n");
+ pr_err("memory for data image is less than IMEM required\n");
goto fail;
} else {
puc_mappedfile += fwhdr_size;
@@ -393,8 +383,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
/* 3. Retriecve EMEM image. */
if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "memory for data image is less than EMEM required\n");
+ pr_err("memory for data image is less than EMEM required\n");
goto fail;
} else {
puc_mappedfile += firmware->fw_imem_len;
@@ -428,8 +417,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unexpected Download step!!\n");
+ pr_err("Unexpected Download step!!\n");
goto fail;
}
@@ -438,14 +426,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
ul_filelength);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("fail!\n");
goto fail;
}
/* <3> Check whether load FW process is ready */
rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+ pr_err("rtl8192se: firmware fail!\n");
goto fail;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index f4ab721..a6f3783 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -75,11 +75,9 @@ void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
case HAL_DEF_WOWLAN:
break;
- default: {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
- break;
- }
+ default:
+ pr_err("switch case %#x not processed\n", variable);
+ break;
}
}
@@ -294,9 +292,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -431,8 +428,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
@@ -745,9 +741,8 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
} while (pollingcnt--);
if (pollingcnt <= 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
- tmpu1b);
+ pr_err("Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+ tmpu1b);
tmpu1b = rtl_read_byte(rtlpriv, CMDR);
rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
udelay(2);
@@ -1004,7 +999,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
if (!rtl92s_phy_mac_config(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+ pr_err("MAC Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1024,7 +1019,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
if (!rtl92s_phy_bb_config(hw)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+ pr_err("BB Config failed\n");
err = rtstatus;
goto exit;
}
@@ -1194,8 +1189,7 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
return 1;
}
@@ -1685,8 +1679,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
break;
case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ pr_err("RTL819X Not boot from eeprom, check it !!\n");
return;
default:
@@ -2030,7 +2023,7 @@ void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92se_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
rtlefuse->autoload_failflag = true;
}
}
@@ -2463,8 +2456,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2481,9 +2473,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv,
- COMP_SEC, DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
index 8700078..b6b890f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c
@@ -63,8 +63,7 @@ void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -99,8 +98,7 @@ void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
index 6299dc1..927bc2d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
@@ -235,7 +235,6 @@ void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (!is_hal_stop(rtlhal)) {
@@ -247,8 +246,7 @@ void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown operation\n");
+ pr_err("Unknown operation\n");
break;
}
}
@@ -288,8 +286,7 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -313,8 +310,7 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -437,9 +433,8 @@ static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- currentcmd->cmdid);
+ pr_err("switch case %#x not processed\n",
+ currentcmd->cmdid);
break;
}
@@ -644,8 +639,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92se_phy_set_rf_sleep(hw);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
@@ -937,8 +931,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -951,8 +944,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
+ pr_err("_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -1077,12 +1069,10 @@ bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
(rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
(rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "RF_Type(%x) does not match RF_Num(%x)!!\n",
- rtlphy->rf_type, rf_num);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "path1 0x%x, path2 0x%x, pathmap 0x%x\n",
- path1, path2, pathmap);
+ pr_err("RF_Type(%x) does not match RF_Num(%x)!!\n",
+ rtlphy->rf_type, rf_num);
+ pr_err("path1 0x%x, path2 0x%x, pathmap 0x%x\n",
+ path1, path2, pathmap);
}
return rtstatus;
@@ -1221,7 +1211,7 @@ void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
} while (--pollingcnt);
if (pollingcnt == 0)
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Set FW Cmd fail!!\n");
+ pr_err("Set FW Cmd fail!!\n");
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
index bd2fa77..ea5b8ec 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c
@@ -523,8 +523,7 @@ void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
index 998cefb..3c66d00 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
@@ -96,8 +96,7 @@ static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
return;
}
if (firmware->size > rtlpriv->max_fw_size) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is too big!\n");
+ pr_err("Firmware is too big!\n");
rtlpriv->max_fw_size = 0;
release_firmware(firmware);
return;
@@ -218,8 +217,7 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl92se_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -299,7 +297,7 @@ static struct rtl_mod_params rtl92se_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = DBG_EMERG,
+ .debug = 0,
};
/* Because memory R/W bursting will cause system hang/crash
--
2.10.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
