On 12/11/16 18:19, Brian Masney wrote: > There are two separate files describing the tsl2583 sysfs attributes. > Combine the two files into one. Updated the name of the sysfs attributes > to match the current ABI. > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > Suggested-by: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> Applied. > --- > .../Documentation/light/sysfs-bus-iio-light-tsl2583 | 16 +++++++++++++++- > .../iio/Documentation/sysfs-bus-iio-light-tsl2583 | 20 -------------------- > 2 files changed, 15 insertions(+), 21 deletions(-) > delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 > > diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 > index 470f7ad..a2e1996 100644 > --- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 > +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 > @@ -1,6 +1,20 @@ > -What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate > +What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate > KernelVersion: 2.6.37 > Contact: linux-iio@xxxxxxxxxxxxxxx > Description: > This property causes an internal calibration of the als gain trim > value which is later used in calculating illuminance in lux. > + > +What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table > +KernelVersion: 2.6.37 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + This property gets/sets the table of coefficients > + used in calculating illuminance in lux. > + > +What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target > +KernelVersion: 2.6.37 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + This property is the known externally illuminance (in lux). > + It is used in the process of calibrating the device accuracy. > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 > deleted file mode 100644 > index 660781d..0000000 > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 > +++ /dev/null > @@ -1,20 +0,0 @@ > -What: /sys/bus/iio/devices/device[n]/lux_table > -KernelVersion: 2.6.37 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - This property gets/sets the table of coefficients > - used in calculating illuminance in lux. > - > -What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate > -KernelVersion: 2.6.37 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - This property causes an internal calibration of the als gain trim > - value which is later used in calculating illuminance in lux. > - > -What: /sys/bus/iio/devices/device[n]/illuminance0_input_target > -KernelVersion: 2.6.37 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - This property is the known externally illuminance (in lux). > - It is used in the process of calibrating the device accuracy. > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
