Replace CamelCase function names with underscores to comply with
the standard kernel coding style.
Signed-off-by: Elise Lennion <elise.lennion@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_chip.c | 4 ++--
drivers/staging/sm750fb/ddk750_display.c | 2 +-
drivers/staging/sm750fb/ddk750_hwi2c.c | 4 ++--
drivers/staging/sm750fb/ddk750_power.c | 14 +++++++-------
drivers/staging/sm750fb/ddk750_power.h | 10 +++++-----
drivers/staging/sm750fb/ddk750_swi2c.c | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 2 +-
7 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index c8c14ee..14b5112 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -261,7 +261,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
}
if (pInitParam->setAllEngOff == 1) {
- enable2DEngine(0);
+ enable_2d_engine(0);
/* Disable Overlay, if a former application left it on */
reg = PEEK32(VIDEO_DISPLAY_CTRL);
@@ -284,7 +284,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
POKE32(DMA_ABORT_INTERRUPT, reg);
/* Disable DMA Power, if a former application left it on */
- enableDMA(0);
+ enable_dma(0);
}
/* We can add more initialization as needed. */
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 0f3a875..c347803 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -153,5 +153,5 @@ void ddk750_setLogicalDispOut(disp_output_t output)
setDAC((output & DAC_MASK) >> DAC_OFFSET);
if (output & DPMS_USAGE)
- ddk750_setDPMS((output & DPMS_MASK) >> DPMS_OFFSET);
+ ddk750_set_dpms((output & DPMS_MASK) >> DPMS_OFFSET);
}
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c
index b60bedf..10439e0 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -24,7 +24,7 @@ unsigned char bus_speed_mode
* Enable Hardware I2C power.
* TODO: Check if we need to enable GPIO power?
*/
- enableI2C(1);
+ enable_i2c(1);
/* Enable the I2C Controller and set the bus speed mode */
value = PEEK32(I2C_CTRL) & ~(I2C_CTRL_MODE | I2C_CTRL_EN);
@@ -45,7 +45,7 @@ void sm750_hw_i2c_close(void)
POKE32(I2C_CTRL, value);
/* Disable I2C Power */
- enableI2C(0);
+ enable_i2c(0);
/* Set GPIO 30 & 31 back as GPIO pins */
value = PEEK32(GPIO_MUX);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 6c15b12..fda9280 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -2,7 +2,7 @@
#include "ddk750_reg.h"
#include "ddk750_power.h"
-void ddk750_setDPMS(DPMS_t state)
+void ddk750_set_dpms(DPMS_t state)
{
unsigned int value;
@@ -17,7 +17,7 @@ void ddk750_setDPMS(DPMS_t state)
}
}
-static unsigned int getPowerMode(void)
+static unsigned int get_power_mode(void)
{
if (sm750_get_chip_type() == SM750LE)
return 0;
@@ -74,7 +74,7 @@ void set_power_mode(unsigned int powerMode)
void set_current_gate(unsigned int gate)
{
- if (getPowerMode() == POWER_MODE_CTRL_MODE_MODE1)
+ if (get_power_mode() == POWER_MODE_CTRL_MODE_MODE1)
POKE32(MODE1_GATE, gate);
else
POKE32(MODE0_GATE, gate);
@@ -85,7 +85,7 @@ void set_current_gate(unsigned int gate)
/*
* This function enable/disable the 2D engine.
*/
-void enable2DEngine(unsigned int enable)
+void enable_2d_engine(unsigned int enable)
{
u32 gate;
@@ -98,7 +98,7 @@ void enable2DEngine(unsigned int enable)
set_current_gate(gate);
}
-void enableDMA(unsigned int enable)
+void enable_dma(unsigned int enable)
{
u32 gate;
@@ -115,7 +115,7 @@ void enableDMA(unsigned int enable)
/*
* This function enable/disable the GPIO Engine
*/
-void enableGPIO(unsigned int enable)
+void enable_gpio(unsigned int enable)
{
u32 gate;
@@ -132,7 +132,7 @@ void enableGPIO(unsigned int enable)
/*
* This function enable/disable the I2C Engine
*/
-void enableI2C(unsigned int enable)
+void enable_i2c(unsigned int enable)
{
u32 gate;
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 7b24f11..ea56026 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -14,29 +14,29 @@ DPMS_t;
(PEEK32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF) | (off)); \
}
-void ddk750_setDPMS(DPMS_t);
+void ddk750_set_dpms(DPMS_t);
void set_power_mode(unsigned int powerMode);
void set_current_gate(unsigned int gate);
/*
* This function enable/disable the 2D engine.
*/
-void enable2DEngine(unsigned int enable);
+void enable_2d_engine(unsigned int enable);
/*
* This function enable/disable the DMA Engine
*/
-void enableDMA(unsigned int enable);
+void enable_dma(unsigned int enable);
/*
* This function enable/disable the GPIO Engine
*/
-void enableGPIO(unsigned int enable);
+void enable_gpio(unsigned int enable);
/*
* This function enable/disable the I2C Engine
*/
-void enableI2C(unsigned int enable);
+void enable_i2c(unsigned int enable);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_swi2c.c b/drivers/staging/sm750fb/ddk750_swi2c.c
index 7fce55d..e2e3ca6 100644
--- a/drivers/staging/sm750fb/ddk750_swi2c.c
+++ b/drivers/staging/sm750fb/ddk750_swi2c.c
@@ -428,7 +428,7 @@ long sm750_sw_i2c_init(
PEEK32(sw_i2c_data_gpio_mux_reg) & ~(1 << sw_i2c_data_gpio));
/* Enable GPIO power */
- enableGPIO(1);
+ enable_gpio(1);
/* Clear the i2c lines. */
for (i = 0; i < 9; i++)
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index d2da7a0..23b6b1c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -479,7 +479,7 @@ void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
{
u32 reg;
- enable2DEngine(1);
+ enable_2d_engine(1);
if (sm750_get_chip_type() == SM750LE) {
reg = PEEK32(DE_STATE1);
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
