[PATCH v2 5/9] staging: wlan-ng: fix block comments style in p80211mgmt.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 This patch fixes the following checkpatch.pl warning in p80211mgmt.h:
 Block comments should align the * on each line

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
 drivers/staging/wlan-ng/p80211mgmt.h | 194 +++++++++++++++++------------------
 1 file changed, 97 insertions(+), 97 deletions(-)

diff --git a/drivers/staging/wlan-ng/p80211mgmt.h b/drivers/staging/wlan-ng/p80211mgmt.h
index 3dd066a..653950f 100644
--- a/drivers/staging/wlan-ng/p80211mgmt.h
+++ b/drivers/staging/wlan-ng/p80211mgmt.h
@@ -1,101 +1,101 @@
 /* p80211mgmt.h
-*
-* Macros, types, and functions to handle 802.11 mgmt frames
-*
-* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-*   The contents of this file are subject to the Mozilla Public
-*   License Version 1.1 (the "License"); you may not use this file
-*   except in compliance with the License. You may obtain a copy of
-*   the License at http://www.mozilla.org/MPL/
-*
-*   Software distributed under the License is distributed on an "AS
-*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*   implied. See the License for the specific language governing
-*   rights and limitations under the License.
-*
-*   Alternatively, the contents of this file may be used under the
-*   terms of the GNU Public License version 2 (the "GPL"), in which
-*   case the provisions of the GPL are applicable instead of the
-*   above.  If you wish to allow the use of your version of this file
-*   only under the terms of the GPL and not to allow others to use
-*   your version of this file under the MPL, indicate your decision
-*   by deleting the provisions above and replace them with the notice
-*   and other provisions required by the GPL.  If you do not delete
-*   the provisions above, a recipient may use your version of this
-*   file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*
-* Inquiries regarding the linux-wlan Open Source project can be
-* made directly to:
-*
-* AbsoluteValue Systems Inc.
-* info@xxxxxxxxxxxxxx
-* http://www.linux-wlan.com
-*
-* --------------------------------------------------------------------
-*
-* Portions of the development of this software were funded by
-* Intersil Corporation as part of PRISM(R) chipset product development.
-*
-* --------------------------------------------------------------------
-*
-* This file declares the constants and types used in the interface
-* between a wlan driver and the user mode utilities.
-*
-* Notes:
-*  - Constant values are always in HOST byte order.  To assign
-*    values to multi-byte fields they _must_ be converted to
-*    ieee byte order.  To retrieve multi-byte values from incoming
-*    frames, they must be converted to host order.
-*
-*  - The len member of the frame structure does NOT!!! include
-*    the MAC CRC.  Therefore, the len field on rx'd frames should
-*    have 4 subtracted from it.
-*
-* All functions declared here are implemented in p80211.c
-*
-* The types, macros, and functions defined here are primarily
-* used for encoding and decoding management frames.  They are
-* designed to follow these patterns of use:
-*
-* DECODE:
-* 1) a frame of length len is received into buffer b
-* 2) using the hdr structure and macros, we determine the type
-* 3) an appropriate mgmt frame structure, mf, is allocated and zeroed
-* 4) mf.hdr = b
-*    mf.buf = b
-*    mf.len = len
-* 5) call mgmt_decode( mf )
-* 6) the frame field pointers in mf are now set.  Note that any
-*    multi-byte frame field values accessed using the frame field
-*    pointers are in ieee byte order and will have to be converted
-*    to host order.
-*
-* ENCODE:
-* 1) Library client allocates buffer space for maximum length
-*    frame of the desired type
-* 2) Library client allocates a mgmt frame structure, called mf,
-*    of the desired type
-* 3) Set the following:
-*    mf.type = <desired type>
-*    mf.buf = <allocated buffer address>
-* 4) call mgmt_encode( mf )
-* 5) all of the fixed field pointers and fixed length information element
-*    pointers in mf are now set to their respective locations in the
-*    allocated space (fortunately, all variable length information elements
-*    fall at the end of their respective frames).
-* 5a) The length field is set to include the last of the fixed and fixed
-*     length fields.  It may have to be updated for optional or variable
-*	length information elements.
-* 6) Optional and variable length information elements are special cases
-*    and must be handled individually by the client code.
-* --------------------------------------------------------------------
-*/
+ *
+ * Macros, types, and functions to handle 802.11 mgmt frames
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ * --------------------------------------------------------------------
+ *
+ * linux-wlan
+ *
+ *   The contents of this file are subject to the Mozilla Public
+ *   License Version 1.1 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.mozilla.org/MPL/
+ *
+ *   Software distributed under the License is distributed on an "AS
+ *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *   implied. See the License for the specific language governing
+ *   rights and limitations under the License.
+ *
+ *   Alternatively, the contents of this file may be used under the
+ *   terms of the GNU Public License version 2 (the "GPL"), in which
+ *   case the provisions of the GPL are applicable instead of the
+ *   above.  If you wish to allow the use of your version of this file
+ *   only under the terms of the GPL and not to allow others to use
+ *   your version of this file under the MPL, indicate your decision
+ *   by deleting the provisions above and replace them with the notice
+ *   and other provisions required by the GPL.  If you do not delete
+ *   the provisions above, a recipient may use your version of this
+ *   file under either the MPL or the GPL.
+ *
+ * --------------------------------------------------------------------
+ *
+ * Inquiries regarding the linux-wlan Open Source project can be
+ * made directly to:
+ *
+ * AbsoluteValue Systems Inc.
+ * info@xxxxxxxxxxxxxx
+ * http://www.linux-wlan.com
+ *
+ * --------------------------------------------------------------------
+ *
+ * Portions of the development of this software were funded by
+ * Intersil Corporation as part of PRISM(R) chipset product development.
+ *
+ * --------------------------------------------------------------------
+ *
+ * This file declares the constants and types used in the interface
+ * between a wlan driver and the user mode utilities.
+ *
+ * Notes:
+ *  - Constant values are always in HOST byte order.  To assign
+ *    values to multi-byte fields they _must_ be converted to
+ *    ieee byte order.  To retrieve multi-byte values from incoming
+ *    frames, they must be converted to host order.
+ *
+ *  - The len member of the frame structure does NOT!!! include
+ *    the MAC CRC.  Therefore, the len field on rx'd frames should
+ *    have 4 subtracted from it.
+ *
+ * All functions declared here are implemented in p80211.c
+ *
+ * The types, macros, and functions defined here are primarily
+ * used for encoding and decoding management frames.  They are
+ * designed to follow these patterns of use:
+ *
+ * DECODE:
+ * 1) a frame of length len is received into buffer b
+ * 2) using the hdr structure and macros, we determine the type
+ * 3) an appropriate mgmt frame structure, mf, is allocated and zeroed
+ * 4) mf.hdr = b
+ *    mf.buf = b
+ *    mf.len = len
+ * 5) call mgmt_decode( mf )
+ * 6) the frame field pointers in mf are now set.  Note that any
+ *    multi-byte frame field values accessed using the frame field
+ *    pointers are in ieee byte order and will have to be converted
+ *    to host order.
+ *
+ * ENCODE:
+ * 1) Library client allocates buffer space for maximum length
+ *    frame of the desired type
+ * 2) Library client allocates a mgmt frame structure, called mf,
+ *    of the desired type
+ * 3) Set the following:
+ *    mf.type = <desired type>
+ *    mf.buf = <allocated buffer address>
+ * 4) call mgmt_encode( mf )
+ * 5) all of the fixed field pointers and fixed length information element
+ *    pointers in mf are now set to their respective locations in the
+ *    allocated space (fortunately, all variable length information elements
+ *    fall at the end of their respective frames).
+ * 5a) The length field is set to include the last of the fixed and fixed
+ *     length fields.  It may have to be updated for optional or variable
+ *	length information elements.
+ * 6) Optional and variable length information elements are special cases
+ *    and must be handled individually by the client code.
+ * --------------------------------------------------------------------
+ */
 
 #ifndef _P80211MGMT_H
 #define _P80211MGMT_H
-- 
1.9.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux