This patch resolves all the following CHECKs caught by checkpatch.pl CHECK: Alignment should match open parenthesis Signed-off-by: Harman Kalra <harman4linux@xxxxxxxxx> --- drivers/staging/fbtft/fb_ili9325.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c index c31e2e0..4ab4479 100644 --- a/drivers/staging/fbtft/fb_ili9325.c +++ b/drivers/staging/fbtft/fb_ili9325.c @@ -38,18 +38,15 @@ static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */ module_param(vc, uint, 0); -MODULE_PARM_DESC(vc, -"Sets the ratio factor of Vci to generate the reference voltages Vci1"); +MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1"); static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */ module_param(vrh, uint, 0); -MODULE_PARM_DESC(vrh, -"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); +MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */ module_param(vdv, uint, 0); -MODULE_PARM_DESC(vdv, -"Select the factor of VREG1OUT to set the amplitude of Vcom"); +MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom"); static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */ module_param(vcm, uint, 0); -- 1.7.9.5 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
